PowerProtect Cyber Recovery: Time changes may cause schedule issues
Summary: Time changes or daylight savings changes in the spring and fall may cause schedules to run an hour late or early. This is due to the "run every 24 hours" setting.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
Time changes or daylight savings changes in the spring and fall may cause schedules to run an hour late or early. This is due to the "run every 24 hours" setting.
The only fix is to manually update the schedules to run at the correct times.
The only fix is to manually update the schedules to run at the correct times.
- Log in into Cyber Recovery UI as cyber-recovery security officer (CRSO).
- Select Polices tab on the left, then Schedules.
- Click Edit for each Schedule, change the schedule to start at the correct time, then Save.
Affected Products
PowerProtect Cyber Recovery, Cyber Recovery SeriesArticle Properties
Article Number: 000197427
Article Type: How To
Last Modified: 27 Sept 2022
Version: 3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.