Dell Unity: Required Network and TCP Ports for Unity Replication
Summary: The tables below list the TCP ports required for Unity Replication. These ports enable communication between Unity Replication services and must be accessible across the network for proper replication functionality. ...
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
The following ports are required for Asynchronous (Async) Replication on Unity:
Table 1. Unity Asynchronous (Async) Replication
| Interface | Protocol | Port |
|---|---|---|
mgmt_vdev@mgmt (Unisphere Management IP) |
TCP | 443 |
| Replication | TCP | 5085 |
| Replication* | TCP | 5086 |
| Replication | TCP | 8888 |
*Required for Unity OE 5.5.0 and later versions.
The following ports are required for Synchronous (Sync) Replication on Unity:
Table 2. Unity Synchronous (Sync) Replication
| Interface | Protocol | Port |
|---|---|---|
mgmt_vdev@mgmt (Unisphere Management IP) |
TCP | 443 |
srm@mgmt (Sync Replication Management IP) |
TCP | 5085 |
srm@mgmt (Sync Replication Management IP)* |
TCP | 5086 |
*Required for Unity OE 5.5.0 and later versions.
Videos
Additional information:
- Manual 31690583: Release Notes for the Dell Unity Family (Page 3).
These Release Notes contain supplemental information about Unity release 5.5.0.0.5.259. - Dell Unity: Network Ports list
- Dell Unity: Replication Remote Connection Fails to Verify after Code Upgrade to 5.5
Affected Products
Dell EMC Unity, Dell EMC Unity Family |Dell EMC Unity All Flash, Dell EMC Unity HybridArticle Properties
Article Number: 000009368
Article Type: How To
Last Modified: 28 Jul 2026
Version: 5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.