NetWorker: Tiedoston palauttaminen komentoriviltä.

Summary: Tässä tietämyskannan artikkelissa on yleiskatsaus NetWorker-asiakkaan tiedoston tai kansion palautukseen.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

HUOMAUTUS: Tämä artikkeli sisältää NetWorker Client -ohjelman komentorivi-FLR:n yleiskatsauksen. Lisätietoja on NetWorker Command Reference Guide -oppaassa artikkelissa Support for NetWorker | Käyttöoppaat ja asiakirjat
  1. Avaa järjestelmänvalvojan oikeuksin suoritettava komentokehote tai komentotulkki NetWorker-palvelimessa.
  2. Etsi palautettavan varmuuskopion tallennusjoukkotunnus (SSID): mminfo -avot -q client=NETWORKER_CLIENT_NAME
HUOMAUTUS: Tallennusjoukko on merkittävä selattavaksi (cb). NetWorker: Kuinka tehdä vanhentuneesta tallennussarjasta selattava
  1. Jos haluat luetella varmuuskopion sisällön, hanki nsavetime palautettavaksi halutusta SSID:stä: mminfo -q ssid=SSID -r nsavetime,client
  2. Luettele tallennusjoukon sisältö (voit halutessasi ohjata tiedostoon): nsrinfo -t nsavetime CLIENT_NAME

Esimerkki:

E:\>nsrinfo -t 1562250655 client_name
scanning client `client_name' for savetime 1562250655(MM/DD/YYYY HH:MM:SS) from the backup namespace
E:\backup1\
E:\daemon.raw
E:\file1.txt
E:\gstd.raw
E:\gstdlog.txt
E:\renderedNsrck.txt
E:\   
7 objects found
  1. Suorita recover NetWorker Serverin komentorivin tiedostotason palautuskomento: recover -c source_client_name -R destination_client_name -iR
    Esimerkki:
B:\>recover -c source_client_name -R destination_client_name -iR 
    No index was found for B:\. The current working directory is /.
    recover> cd E:\
    recover> ls
     backup1                gstd.raw               renderedNsrck.txt
     daemon.raw             gstdlog.txt
     file1.txt              ISNTOPV01_daemon.raw
    recover> version [displays all the latest backups performed for a save set E:\]

    Versions of `E:\':

        0 d                0 7/4/2019 07:20 \
         save time:  7/4/2019 7:30:55 AM
          location:  test.002 at test

     0 d                0 7/4/2019 07:20 \
     save time:  7/4/2019 7:21:04 AM
      location:  test.002 at test

     0 d                0 7/4/2019 05:52 \
     save time:  7/4/2019 7:03:48 AM
      location:  test.002 at test

    recover> changetime 7/4/2019 7:30:55 AM  [Performed E:\ backup for 3 times and selecting latest backup to perform recovery]
    18361:recover: time changed to 07/04/2019 07:30:55 (mm/dd/yyyy)
    recover> ls
     backup1                gstd.raw               renderedNsrck.txt
     daemon.raw             gstdlog.txt
     file1.txt              
    recover> add daemon.raw
    1 file(s) marked for recovery
    recover> relocate
    6479:recover: <return> will recover files into their original location
    New destination directory: F:\Test
    recover> recover
    Recovering 1 file from E:\ into F:\Test
    Volumes needed (all on-line):test.002 at test
    Total estimated disk space needed for recover is 229 KB.
    Requesting 1 file(s), this may take a while...
    Recover start time: 7/4/2019 7:46:58 AM
    Requesting 1 recover session(s) from server.
    129290:recover: Successfully established direct file retrieve session for save-set ID '4112387488' with adv_file volume 'test.002'.
    F:\Test\daemon.raw
    Received 1 file(s) from NSR server `networker_client_name'
    Recover completion time: 7/4/2019 7:47:01 AM
    recovery

Edellä olevassa esimerkissä daemon.raw tiedoston palautus F:\Test-sijaintiin.

Additional Information

NetWorker: Kuinka suorittaa 'Save Set Recovery' komentoriviltä

Affected Products

NetWorker

Products

NetWorker
Article Properties
Article Number: 000019763
Article Type: How To
Last Modified: 26 Sept 2025
Version:  5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.