NetWorker: Como recuperar um arquivo usando a linha de comando.

Summary: Este artigo da KB apresenta uma visão geral de como executar uma recuperação de arquivo ou pasta de um client do NetWorker.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

Nota: Este artigo fornece uma visão geral de uma FLR de linha de comando de um client NetWorker. Para obter informações adicionais, consulte o NetWorker Command Reference Guide, Support for NetWorker | Manuais e documentos
  1. Abra um prompt de comando ou shell elevado no servidor do NetWorker.
  2. Identifique o ID do saveset (SSID) de um backup que você gostaria de recuperar: mminfo -avot -q client=NETWORKER_CLIENT_NAME
Nota: O saveset deve ser marcado como navegável (cb). NetWorker: Como tornar um saveset expirado navegável
  1. Para listar o conteúdo do backup, obtenha o nsavetime do SSID desejado para restauração: mminfo -q ssid=SSID -r nsavetime,client
  2. Liste o conteúdo do saveset (opcionalmente, redirecione para um arquivo): nsrinfo -t nsavetime CLIENT_NAME

Exemplo:

E:\>nsrinfo -t 1562250655 client_name
scanning client `client_name' for savetime 1562250655(MM/DD/YYYY HH:MM:SS) from the backup namespace
E:\backup1\
E:\daemon.raw
E:\file1.txt
E:\gstd.raw
E:\gstdlog.txt
E:\renderedNsrck.txt
E:\   
7 objects found
  1. Execute o recover comando na linha de comando do servidor NetWorker para fazer a recuperação em nível de arquivo: recover -c source_client_name -R destination_client_name -iR
    Exemplo:
B:\>recover -c source_client_name -R destination_client_name -iR 
    No index was found for B:\. The current working directory is /.
    recover> cd E:\
    recover> ls
     backup1                gstd.raw               renderedNsrck.txt
     daemon.raw             gstdlog.txt
     file1.txt              ISNTOPV01_daemon.raw
    recover> version [displays all the latest backups performed for a save set E:\]

    Versions of `E:\':

        0 d                0 7/4/2019 07:20 \
         save time:  7/4/2019 7:30:55 AM
          location:  test.002 at test

     0 d                0 7/4/2019 07:20 \
     save time:  7/4/2019 7:21:04 AM
      location:  test.002 at test

     0 d                0 7/4/2019 05:52 \
     save time:  7/4/2019 7:03:48 AM
      location:  test.002 at test

    recover> changetime 7/4/2019 7:30:55 AM  [Performed E:\ backup for 3 times and selecting latest backup to perform recovery]
    18361:recover: time changed to 07/04/2019 07:30:55 (mm/dd/yyyy)
    recover> ls
     backup1                gstd.raw               renderedNsrck.txt
     daemon.raw             gstdlog.txt
     file1.txt              
    recover> add daemon.raw
    1 file(s) marked for recovery
    recover> relocate
    6479:recover: <return> will recover files into their original location
    New destination directory: F:\Test
    recover> recover
    Recovering 1 file from E:\ into F:\Test
    Volumes needed (all on-line):test.002 at test
    Total estimated disk space needed for recover is 229 KB.
    Requesting 1 file(s), this may take a while...
    Recover start time: 7/4/2019 7:46:58 AM
    Requesting 1 recover session(s) from server.
    129290:recover: Successfully established direct file retrieve session for save-set ID '4112387488' with adv_file volume 'test.002'.
    F:\Test\daemon.raw
    Received 1 file(s) from NSR server `networker_client_name'
    Recover completion time: 7/4/2019 7:47:01 AM
    recovery

No exemplo acima, o arquivo daemon.raw foi recuperado com sucesso para o local F:\Test.

Additional Information

NetWorker: Como executar uma "recuperação de saveset" a partir da linha de comando

Affected Products

NetWorker

Products

NetWorker
Article Properties
Article Number: 000019763
Article Type: How To
Last Modified: 26 Sept 2025
Version:  5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.