IDPA ESXi upgrade fails with error message "[DependencyError]rn File path of '/opt/lsi/perccli/libstorelib.so' is claimed by multiple non-overlay VIBs"

Resumen: This KB Article walks you through an issue seen during IDPA upgrade where ESXi upgrade fails due to dependency error.

Este artículo se aplica a Este artículo no se aplica a Este artículo no está vinculado a ningún producto específico. No se identifican todas las versiones del producto en este artículo.
Consulte estos recursos

Síntomas



The following error can be seen on the ESXi upgrade log on ACM under path "/data01/tmp/patch/logs" :

6/03/20 17:23:16  main() Package name: IDPA-13G-ESXi-6.5.0-002
26/03/20 17:23:16  main() Executing install packages command: esxcli software profile update --depot=https://192.168.100.100:9443/dataprotection-upgrade/esxi_upgrade --profile=IDPA-13G-ESXi-6.5.0-002
26/03/20 17:23:19   run() Parsing returnCode, output: ['', "[DependencyError]\r\n File path of '/opt/lsi/perccli/libstorelib.so' is claimed by multiple non-overlay VIBs: set(['LSI_bootbank_vmware-perccli-007.0529.0000.0000_007.0529.0000.0000-01', 'LSI_bootbank_perccli_007.0127.0000.0000-2'])\r\n File path of '/opt/lsi/perccli/perccli' is claimed by multiple non-overlay VIBs: set(['LSI_bootbank_vmware-perccli-007.0529.0000.0000_007.0529.0000.0000-01', 'LSI_bootbank_perccli_007.0127.0000.0000-2'])\r\n Please refer to the log file for more details.", 'Status: 1']
26/03/20 17:23:19 run_cmd_esxi() Command: esxcli software profile update --depot=https://192.168.100.100:9443/dataprotection-upgrade/esxi_upgrade --profile=IDPA-13G-ESXi-6.5.0-002
26/03/20 17:23:19 run_cmd_esxi() [DependencyError]
26/03/20 17:23:19 run_cmd_esxi()  File path of '/opt/lsi/perccli/libstorelib.so' is claimed by multiple non-overlay VIBs: set(['LSI_bootbank_vmware-perccli-007.0529.0000.0000_007.0529.0000.0000-01', 'LSI_bootbank_perccli_007.0127.0000.0000-2'])
26/03/20 17:23:19 run_cmd_esxi()  File path of '/opt/lsi/perccli/perccli' is claimed by multiple non-overlay VIBs: set(['LSI_bootbank_vmware-perccli-007.0529.0000.0000_007.0529.0000.0000-01', 'LSI_bootbank_perccli_007.0127.0000.0000-2'])
26/03/20 17:23:19 run_cmd_esxi()  Please refer to the log file for more details.
26/03/20 17:23:19 run_cmd_esxi() Status: 1
26/03/20 17:23:19  main() Install packages command result: 1
26/03/20 17:23:19  main() Failed to install packages.

Causa

'vmware-perccli-007.0529.0000.0000_007.0529.0000.0000-01' VIB installed on the ESXi host causes this issue

Resolución

Step 1. SSH to the ESXi host in question.

Step 2. Run the following command to uninstall the conflicting VIB:
  • esxcli software vib remove --vibname vmware-perccli-007.0529.0000.0000
Example Output:
[root@esx1:~]  esxcli software vib remove --vibname vmware-perccli-007.0529.0000.0000
Removal Result
   Message: Operation finished successfully.
   Reboot Required: false
   VIBs Installed:
   VIBs Removed: LSI_bootbank_vmware-perccli-007.0529.0000.0000_007.0529.0000.0000-01
   VIBs Skipped:

Step 3. Verify the VIB was successfully removed:
  • esxcli software vib list|  grep -i perccli
Note: The above command should show you blank output if the VIB was removed successfully. 

Step 4. Retry the ESXi Upgrade from the ACM UI. 

Productos afectados

Integrated Data Protection Appliance Family

Productos

PowerProtect DP5300, PowerProtect DP5800, PowerProtect DP8300, PowerProtect DP8800, PowerProtect Data Protection Software, Integrated Data Protection Appliance Family, PowerProtect Data Protection Hardware , Integrated Data Protection Appliance Software ...
Propiedades del artículo
Número del artículo: 000173292
Tipo de artículo: Solution
Última modificación: 27 may 2025
Versión:  3
Encuentre respuestas a sus preguntas de otros usuarios de Dell
Servicios de soporte
Compruebe si el dispositivo está cubierto por los servicios de soporte.