Solutions Enabler 10.x symclone action using logical device name fails: The requested feature is not supported for this microcode or SYMAPI version

Résumé: Solutions Enabler 10.x symclone action using logical device name fails with : The requested feature is not supported for this microcode or SYMAPI version

Cet article concerne Cet article ne concerne pas Cet article n’est associé à aucun produit spécifique. Toutes les versions du produit ne sont pas identifiées dans cet article.
Consulter d’autres ressources

Symptômes

Solutions Enabler 10.x symclone action using logical device name fails with : 
The requested feature is not supported for this microcode or SYMAPI version
(for example command like : symclone -sid <sid> -g <dg> create DEV001 sym ld  TGT001  -precopy -diff).

Same command runs successfully with Solutions Enabler 9.x.

Cause

Using Logical device names with symrdf, symmir and symclone has been deprecated in version 10.x and above.
In Solutions Enabler 8.4, it was announced:

Résolution

Solutions Enabler versions upto 9.2.x tolerated using Logical device name with the SYM ld syntax.
Solutions Enabler 10.x no longer support  the SYM ld syntax.

The same action command can be executed using the -f <filename> facility to define the source and target devices of the operation, example :  
symclone -sid xxx -f <fff> create -precopy -diff
where fff contains:
100 200

Please see symclone -h for the full command syntax available with the version installed.

Produits concernés

Solutions Enabler
Propriétés de l’article
Numéro d’article: 000223602
Type d’article: Solution
Dernière modification: 20 May 2026
Version:  3
Trouvez des réponses à vos questions auprès d’autres utilisateurs Dell
Services de support
Vérifiez si votre appareil est couvert par les services de support.