OptiPlex 5060 Teardown Removal Guide for Customer Replaceable Units (CRUs)
Summary: An OptiPlex 5060 teardown removal can be performed for customer replaceable units by following these instructions.
Ez a cikk a következő(k)re vonatkozik:
Ez a cikk nem vonatkozik a következő(k)re:
Ez a cikk nem kapcsolódik egyetlen konkrét termékhez sem.
Ez a cikk nem azonosítja az összes termékverziót.
Symptoms
These guides take you step by step through the safe removal of what are considered to be the Customer Replaceable Unit (CRU) parts of the various OptiPlex 5060 form factors. (CRUs are the parts of the system that should not need an engineer to remove or replace.) The guides also include figures to reference what is involved.
Table of Contents:
- Removal Guide Introduction
- The Mini Tower (MT) Chassis
- The Small Form Factor (SFF) Chassis
- The Micro Form Factor (MFF) Chassis
Cause
Not applicable
Resolution
Removal Guide Introduction
If these guides do not cover what you are looking to do, then reference your System Manual.
The Mini Tower (MT) Chassis
The Small Form Factor (SFF) Chassis
The Micro Form Factor (MFF) Chassis
- OptiPlex 5060 MFF (Micro Form Factor) Teardown removal guide for customer replaceable units (CRUs)
- OptiPlex Micro Form Factor Mounting Options and Installation Methods
| If you require further assistance, contact Technical Support. | ||
| Contact Us |
Érintett termékek
OptiPlex 5060 Tower, OptiPlex 5060 Micro, OptiPlex 5060 Small Form FactorTermék tulajdonságai
Article Number: 000148767
Article Type: Solution
Utoljára módosítva: 30 jún. 2023
Version: 7
Választ kaphat kérdéseire más Dell-felhasználóktól
Támogatási szolgáltatások
Ellenőrizze, hogy a készüléke rendelkezik-e támogatási szolgáltatással.