PowerStore: System Health Checks detects a stale SCSI3 reservation issue

Summary: This System Health Check (SHC) to detect if a system with PowerStoreOS version 4.0.x is affected with the stale SCSI3 reservation issue. For details on this issue, see KB# 000234421.

Ez a cikk a következő(k)re vonatkozik: Ez a cikk nem vonatkozik a következő(k)re: Ez a cikk nem kapcsolódik egyetlen konkrét termékhez sem. Ez a cikk nem azonosítja az összes termékverziót.
További források megtekintése

Symptoms

System Health may display a Found Volumes with scale SCSI3 reservation (KB#000234421) message in one of the following scenarios:
 

  • Running a System Check using PowerStore Manager (GUI) with the Run System Check option:
Stale SCSI3 reservation detected
  • Running the System Health Service Script (svc_health_check) using an SSH connection:
[SVC:service@50T1BW2-A user]$ svc_health_check run -rhc stale_scsi3_reservation_check
Name                               Location  Status     Description
Stale SCSI3 reservation check      node_b    Failed     Found volumes with stale SCSI3 reservation.(KB#000234421)
 
 
SUMMARY Status: Failed
   Passed:      0
   Failed:      1
   Total:       1

   

    Note: Results may vary based on the node where the check failed.
   

  

  

    
  

  

   For further details on the SCSI3 stale reservation issue that is detected by this SHC check, see KB# 000234421 PowerStore: Invalid SCSI-3 reservations and registrations may cause a software upgrade to PowerStoreOS 4.0.0.x to fail
  

  

    
  

  

   The health check is an off-release SHC check that is contained in the Health Check thin package. See the Additional Info section of this article for information about the Health Check thin package.
  

        
Cause

        
Appliances running PowerStoreOS version 3.6 or earlier version may have SCSI3 reservation with invalid or mismatch SCSI registration

  
During NDU to version 4.0.x of such appliances, NDU may fail if the owner_idx has no corresponding SCSI reg object. However, if the owner_idx is reused (even if it is for a different volume), NDU to 4.0.x will succeed. In such scenario, when system runs on version 4.0.x code, the invalid or mismatch SCSI registration may cause a System Manager (SYM) rolling panic condition.

        
Resolution

        
To resolve this issue, contact technical support for assistance. Reference KB# 000234421 for expedited attention and resolution.


                    
Additional Information

        
KB# 000192601 PowerStore: How to Check the Health of the Cluster Before Software Upgrade Using Pre-Upgrade Health Check and System Check.

    

  
KB# 000214752 PowerStore: Landing Page for In Market (off-release) System Health Checks lists all the health checks in the Health Check thin package.




        

        
        
Érintett termékek

        PowerStore







                        

                            

    

        

            

                
                    
 Termék tulajdonságai

                
            

            

                

                        
Article Number: 000259473

                

                
                

                        
Article Type: Solution

                

                

                        
Utoljára módosítva: 14 jún. 2025


                

                    

                            
Version:  2

                    


            


        

    

    

        

            

                
                    
Választ kaphat kérdéseire más Dell-felhasználóktól

                
            

            

                

                    
                



            


        

    

    

        

            

                
                    
Támogatási szolgáltatások

                
            

            

                

                    Ellenőrizze, hogy a készüléke rendelkezik-e támogatási szolgáltatással.