Dell Unity：如何使用 CLI 扩展 Unity 池

요약: 有哪些选项可以在用户界面 （UI） 之外扩展 Dell Unity 池？

이 문서는 다음에 적용됩니다. 이 문서는 다음에 적용되지 않습니다. 이 문서는 특정 제품과 관련이 없습니다. 모든 제품 버전이 이 문서에 나와 있는 것은 아닙니다.
기타 리소스 확인

지침

问题：无法从 UI 扩展池。

 

1.检查池的状态并获取驱动器和 RAID 组信息：     

  
uemcli /stor/config/pool -name <pool_name> show -detail
 
Example:      
14:11:25 service@xyz spb:~/user> uemcli /stor/config/pool -name XYZ123 show -detail 
1:    ID                                                = pool_3
      Type                                              = Dynamic
      Name                                              = March2025
      Description                                       =
      Total space                                       = 3815810007040 (3.4T)
      Current allocation                                = 20392058880 (18.9G)
      Preallocated                                      = 11551760384 (10.7G)
      Remaining space                                   = 3783866187776 (3.4T)
      Subscription                                      = 1182995120128 (1.0T)
      Flash percent                                     = 39%
      Subscription percent                              = 31%
      Alert threshold                                   = 70%
      Drives                                            = 6 x 600.0G SAS; 6 x 400.0G SAS Flash 3
      Number of drives                                  = 12
      RAID level                                        = 5
      Stripe length                                     = 5
      Rebalancing                                       = no
      Rebalancing progress                              =
      Health state                      = Degraded/Warning (10)
      Health details                    = "This storage pool exceeds the critical capacity threshold. Thin-provisioned resources may suffer data loss or become unavailable when the pool reaches full capacity. Snapshots may become invalid and replication sessions may stop synchronizing for storage resources provisioned in this pool. To allocate more storage space, add more disks to your system. (https://10.120.162.226/help/webhelp/en_US/index.html?#unity_c_storage_pool_at_or_near_full_capacity.html)"

2.根据要求插入驱动器。检查 RAID 组并插入驱动器以根据需要扩展池。

3.使用以下命令检查驱动器是否联机：       

fbecli.exe
pdo
 
这些命令显示驱动器的数量和联机驱动器的状态。将此输出与上述输出进行匹配，以确定 pdo 输出中的驱动器多于池。
 
4.使用以下命令检查包含未配置驱动器的磁盘组：       
uemcli /stor/config/dg -traditional show
 
此命令显示包含未配置驱动器的磁盘组。

示例：      
1:    ID                                = dg_28
      Drive type                        = SAS Flash 3
      FAST Cache                        = no
      Drive size                        = 1575700986880 (1.4T)
      Vendor size                       = 1.6T
      Rotational speed                  = 0 rpm
      Number of drives                  = 43
      Unconfigured drives               = 7
      Capacity                          = 67755142435840 (61.6T)
      Recommended number of spares      = 2
  1. 使用以下命令检查要在其中添加驱动器的配置文件：     
uemcli /stor/config/profile -traditional -configurable show
 
此命令显示要在其中添加驱动器的配置文件，以便根据 RAID 组扩展池。此外，请检查属于此配置文件的磁盘组。

例：      
1:    ID                                = tprofile_1
      Type                              = Traditional
      Description                       = SAS Flash RAID5 (4+1)
      Drive type                        = SAS Flash
      RAID level                        = 5
      Maximum capacity                  = 7878504934400 (7.1T)
      Stripe length                     = 5
      Disk group                        = dg_28
      Maximum drives to configure       = 5
      Maximum capacity to configure     = 6302669729792 (5.7T)

 

  1. 运行 uemcli 命令以扩展池：      
uemcli -d 10.0.0.0 -u admin -p 'MyPassword123!' /stor/config/pool -id pool_1 extend -diskGroup dg_28 -drivesNumber 5 -storProfile tprofile_1
 
在上面的示例中，磁盘组为 dg_28，配置文件为 tprofile_1，则要扩展的池的 ID 为 pool_1，并且根据 RAID 组，扩展池的驱动器数量为 5。

在命令给出输出后，输出为 "Operation completed successfully."，则使用步骤 1 再次检查驱动器数量和池状态。

例：      
15:12:26 root@xyz spb:/cores/service/user> uemcli /stor/config/pool show -detail
Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

1:    ID                                = pool_1
      Type                              = Traditional
      Name                              = File and VMware Production Pool
      Description                       = Default production pool
      Total space                       = 55718073860096 (50.6T)
      Current allocation                = 47159708909568 (42.8T)
      Preallocated                      = 97010941952 (90.3G)
      Remaining space                   = 8461354008576 (7.6T)
      Subscription                      = 66559913492480 (60.5T)
      Subscription percent              = 119%
      Alert threshold                   = 70%
      Drives                            = 41 x 1.6T SAS Flash 3
      Number of drives                  = 41
      RAID level                        = 5
      Stripe length                     = Mixed
      Rebalancing                       = yes
      Rebalancing progress              = 0%
      Health state                      = OK_BUT (7)
      Health details                    = "This storage pool has exceeded the capacity threshold you specified. To allocate more storage space, add additional disks to your system. (https://10.120.162.226/help/webhelp/en_US/index.html?#unity_c_storage_pool_at_or_near_full_capacity.html)"
      Protection size used              = 0
      Non-base size used                = 0
      Auto-delete state                 = Idle
      Auto-delete paused                = no
      Auto-delete pool full threshold enabled           = yes
      Auto-delete pool full high water mark             = 95%
      Auto-delete pool full low water mark              = 85%
      Auto-delete snapshot space used threshold enabled = no
      Auto-delete snapshot space used high water mark   = 25%
      Auto-delete snapshot space used low water mark    = 20%
      Compression space saved                           = 2968627707904 (2.6T)
      Compression Percent                               = 6%
      Compression Ratio                                 = 1.1:1
      Data Reduction space saved                        = 2968627707904 (2.6T)
      Data Reduction Percent                            = 6%
      Data Reduction Ratio                              = 1.1:1
      All flash pool                                    = yes

추가 정보

有关池配置 Documentation/unity-family/unity-p-pool-config，请参阅戴尔支持网站上。

해당 제품

Dell EMC Unity Family |Dell EMC Unity All Flash

제품

Dell EMC Unity Family |Dell EMC Unity All Flash, Dell EMC Unity Family
문서 속성
문서 번호: 000020429
문서 유형: How To
마지막 수정 시간: 12 11월 2025
버전:  6
다른 Dell 사용자에게 질문에 대한 답변 찾기
지원 서비스
디바이스에 지원 서비스가 적용되는지 확인하십시오.