NetWorker: Creating a Data Domain device fails with error: Authentication type AUTH_NONE not adequate
요약: Attempting to create a NetWorker Data Domain device fails, peer information must be cleared on all involved hosts for the other hosts.
이 문서는 다음에 적용됩니다.
이 문서는 다음에 적용되지 않습니다.
이 문서는 특정 제품과 관련이 없습니다.
모든 제품 버전이 이 문서에 나와 있는 것은 아닙니다.
증상
Data Domain device creation fails in NetWorker, the following error is observed:
authentication error: Rd=SN-NAME:DD-NAME_DEV-NAME Authentication type AUTH_NONE not adequate
Where SN-NAME is the name of the remote storage node.
Where DD-NAME is the name of the Data Domain.
Where DEV-NAME is the name of the device user is attempting to create.
원인
Corrupted NetWorker peer information between the NetWorker server and the Storage Node managing the device.
해결
Clear the NetWorker peer information on both the NetWorker server and storage nodes observing this failure. One of the following methods can be used:
- NetWorker: How to clear NSR peer information mismatches automatically using nsradmin -C
- NetWorker: Fixing inconsistent NSR peer information
NOTE: If the NetWorker Management Console (NMC) server is on a separate host from the NetWorker server, the NMC server's peer information should also be cleared.
해당 제품
NetWorker제품
NetWorker, NetWorker Series문서 속성
문서 번호: 000036946
문서 유형: Solution
마지막 수정 시간: 14 1월 2026
버전: 4
다른 Dell 사용자에게 질문에 대한 답변 찾기
지원 서비스
디바이스에 지원 서비스가 적용되는지 확인하십시오.