Avamar: Data Domain Integration: Administrator UI Reports an incorrect Data Domain Status due to a time mismatch

요약: A time mismatch between a Data Domain and the Avamar can result in "The Avamar server's time is ahead of DD's" in the Avamar Administrator UI.

이 문서는 다음에 적용됩니다. 이 문서는 다음에 적용되지 않습니다. 이 문서는 특정 제품과 관련이 없습니다. 모든 제품 버전이 이 문서에 나와 있는 것은 아닙니다.
기타 리소스 확인

증상

The following appears in the Avamar Administrator UI:

The Avamar server's time is ahead of DD's.
 

The bottom-right corner of the Administrator UI can also display "Data Domain Unresponsive".

Notes: 
  • There is no impact to backups to Avamar or Data Domain
  • There is no impact to Avamar maintenance activities.

원인

The Network Time Protocol (NTP) is not running or disabled.

해결

1. Ensure that all Avamar maintenance activities are completed without issue. 

a. Log in to the Avamar server and load the keys (Avamar: How to Log in to an Avamar Server and Load Various Keys).

b. Run the status.dpn command and verify that all Avamar maintenance is completing without issue. See Avamar: How to understand the output generated by the status.dpn command for more information about the output.

The following is a sample output when the maintenance was completed without issue: 

Last checkpoint: cp.20231030150317 finished Mon Oct 30 08:03:36 2023 after 00m 19s (OK)
Last GC: finished Mon Oct 30 07:00:38 2023 after 00m 02s >> recovered 632.51 KB (OK)
Last hfscheck: finished Mon Oct 30 08:03:04 2023 after 02m 00s >> checked 37 of 37 stripes (OK)
 

2. Check the date and time on Avamar and on the Data Domain. This output to see if there is a match. 

a. If not already logged in, login to the Avamar server and load the keys (Avamar: How to Log in to an Avamar Server and Load Various Keys).

b. Check the data/time on Avamar using the "date" command:

date
Mon Oct 30 10:07:55 PDT 2023
 

c. Access the Data Domain server in Admin or SE mode (How To Access a Data Domain System from an Avamar Server).

d. Check the date and time on the Data Domain using the "date" command:

date
Thu Oct 30 09:34:41 PDT 2023
 

3. Compare the output.

The example above shows that the time of the Avamar grid and the Data Domain are different.

4. Verify that the Network Time Protocol (NTP) is configured and running on the Data Domain:

a. Check the configuration:

ntp show config 
NTP is currently disabled.
No NTP servers configured; using multicast mode.
 

-- Or --

#   Server
-   ------------
1   10.162.204.1
2   10.166.1.1
3   10.166.1.2
-   ------------
Showing NTP servers configured manually.
 

b. Check the status:

ntp status 
**** NTP daemon is not running.
 

-- Or --

Status                                     Disabled
Current Clock Time                         Unknown
Clock Last Synchronized                    Unknown
Clock Last Synchronized With Time Server   Unknown
 
 

5. Perform the actions below depending on the output of the above.

  • If NTP is disabled and not configured:

Verify with the customer that this is expected.

 
  • If the NTP name servers are incorrect, correct them:
 
  • Add one or more remote time servers: 
ntp add timeserver <time server list>
  • Delete one or more remote time servers:
ntp del timeserver <time server list>
 
  • If NTP is not running, disable and re-enable it:
ntp disable
NTP disabled.
  
ntp enable 
NTP enabled.
 
  • If NTP is disabled, re-enable it:
ntp enable 
NTP enabled.
     

    6. Check the status and configuration again, and verify that it is configured correctly, and enabled.

    ntp show config
      
    ntp status 
    Status                                     Enabled
Current Clock Time                         Thu Oct 30 18:25:23.682 2023
Clock Last Synchronized                    Unknown
Clock Last Synchronized With Time Server   Unknown

    -- Or --

    Status                                     Enabled
Current Clock Time                         Thu Oct 30 18:25:23.682 2023
Clock Last Synchronized                    Thu Oct 30 17:52:59.403 2023
Clock Last Synchronized With Time Server   10.10.10.240
     

    7. Correct the time:

     

    • If the time on the Data Domain is incorrect:

    a. Disable NTP:

    ntp disable 
    NTP disabled.
     

    b. Correct the time on the Data Domain using the "system set date" command:

    system set date <MMDDhhmm[[CC]YY]>
     

    Example:

    system set date 10301013
     

    Example output

    **   System date will be adjusted by 1939 seconds. This change can
     potentially cause issues for applications running on this system.
        Are you sure? (yes|no|?) [no]: yes

ok, proceeding.
    Thu Oct 30 10:13:00 PDT 2023
     

    c. Enable NTP:

    ntp enable 
    NTP enabled.
     
     

    If the issue is still not resolved, see Avamar: Troubleshooting Data Domain Integration Errors in the Avamar Administrator UI (Resolution Path)

    해당 제품

    Avamar

    제품

    Avamar, Avamar Server, Data Domain
    문서 속성
    문서 번호: 000039451
    문서 유형: Solution
    마지막 수정 시간: 23 5월 2025
    버전:  9
    다른 Dell 사용자에게 질문에 대한 답변 찾기
    지원 서비스
    디바이스에 지원 서비스가 적용되는지 확인하십시오.