Dell EMC Unity: The HBA initiator doesn't log into array showing no active initiator paths.
요약: Customer asked about this alert on his initiators showing as not logged in through Unisphere
이 문서는 다음에 적용됩니다.
이 문서는 다음에 적용되지 않습니다.
이 문서는 특정 제품과 관련이 없습니다.
모든 제품 버전이 이 문서에 나와 있는 것은 아닙니다.
증상
Customer asked about this alert on his initiators showing as not logged in through Unisphere
원인
The host doesn't have any initiators logged into storage system.
This is caused mainly because one or more initiators on the hosts are not registered to the storage system, this may also require zoning changes on the switches.
This is caused mainly because one or more initiators on the hosts are not registered to the storage system, this may also require zoning changes on the switches.
해결
The customer has to make sure from the below points:
-Check the connection between the initiator and storage system (he has to assign a LUN for the initiator of the host)
-Ensure that the zoning configuration is correct for the fiber channel (FC) connections, and the ISCSI connections from the relevant hosts are actually logged into the storage resource on the storage system.
-Check the connection between the initiator and storage system (he has to assign a LUN for the initiator of the host)
-Ensure that the zoning configuration is correct for the fiber channel (FC) connections, and the ISCSI connections from the relevant hosts are actually logged into the storage resource on the storage system.
해당 제품
Dell EMC Unity Family제품
Dell EMC Unity Family문서 속성
문서 번호: 000055187
문서 유형: Solution
마지막 수정 시간: 23 10월 2025
버전: 4
다른 Dell 사용자에게 질문에 대한 답변 찾기
지원 서비스
디바이스에 지원 서비스가 적용되는지 확인하십시오.