The server LCD presents an error message, or an error message is generated when running the Enhanced Pre-Boot System Assessment (ePSA).
Refer to:
Dell Event Message Reference (Event and Error Message Reference Guide for 14th Generation Dell EMC PowerEdge Servers)
The Event Message Reference contains the error and event information generated by firmware and other agents that monitor system components. These events might be logged, presented to the user on one of the system management consoles, or both logged and displayed.
Additional Information:
To run the Embedded System Diagnostics (also known as Enhanced Pre-Boot System Assessment).
- As the system boots, press <F11>.
- Use the up and down arrows keys to select System Utilities -> Launch Dell Diagnostics