Isilon: Node Firmware versions show in firmware status list

요약: When 'isi upgrade cluster firmware devices' shows for all columns instead of the installed firmware versions.

이 문서는 다음에 적용됩니다. 이 문서는 다음에 적용되지 않습니다. 이 문서는 특정 제품과 관련이 없습니다. 모든 제품 버전이 이 문서에 나와 있는 것은 아닙니다.
기타 리소스 확인

증상

isi upgrade cluster firmware devices shows the firmware version columns for all components in the cluster show <Unknown> <Unknown>.

원인

This is triggered when the installed firmware package and the OneFS version that it is installed on are incompatible. There are two active branches of Node Firmware Package: the 10.x branch, which is compatible with OneFS 8.x, and the 11.x branch, which is compatible with OneFS 9.x. Installing the wrong branch on a OneFS version it is not compatible with causes this issue to appear.

 

해결

First off, determine whether the wrong Node Firmware Package for your OneFS version is installed. If so, uninstall it. Then:
  • If the cluster to be updated is running OneFS 8.x, install the latest NFP 10.x version.
  • If the cluster to be updated is running OneFS 9.x, install the latest NFP 11.x version.
Both branches are equal in terms of content, and both branches are being updated with newer firmware as it becomes available. The only difference is the OneFS version compatibility.

해당 제품

Isilon, Isilon A100, Isilon A2000, Isilon F800, Isilon F810, Isilon Gen6.5, Isilon Gen6, Isilon H400, Isilon H500, Isilon H5600, Isilon H600, Isilon HD400, Isilon S210, Isilon X210, Isilon X410, PowerScale Archive A300, PowerScale Archive A3000 , PowerScale F200, PowerScale F600, PowerScale F900, PowerScale Hybrid H700, PowerScale Hybrid H7000 ...
문서 속성
문서 번호: 000192587
문서 유형: Solution
마지막 수정 시간: 12 5월 2026
버전:  4
다른 Dell 사용자에게 질문에 대한 답변 찾기
지원 서비스
디바이스에 지원 서비스가 적용되는지 확인하십시오.