Microsoft Windows: Jak shromáždit nástroj Perfmon ze všech uzlů clusteru pomocí prostředí PowerShell

요약: Tento článek vysvětluje, jak shromažďovat protokoly výkonu ze všech uzlů clusteru pomocí PowerShellu.

이 문서는 다음에 적용됩니다. 이 문서는 다음에 적용되지 않습니다. 이 문서는 특정 제품과 관련이 없습니다. 모든 제품 버전이 이 문서에 나와 있는 것은 아닙니다.
기타 리소스 확인

지침

Spusťte PowerShell jako správce a zkopírujte a vložte následující příkaz:

Get-ClusterNode).Name | % {Invoke-Command -ComputerName $_ -ScriptBlock {"$(logman create counter FULL-Short -o "c:\diag\%computername%_PerfLog-Short.blg" -f bincirc -v mmddhhmm -max 500 -c "\Cache\*" "\Cluster CSV File System(*)\*" "\Cluster CSV Volume Cache(*)\*" "\Cluster CSV Volume Manager(*)\*" "\Cluster CSVFS(*)\*" "\Cluster Storage Cache Stores(*)\*" "\Cluster Storage Hybrid Disks(*)\*" "\Hyper-V Hypervisor Logical Processor(*)\*" "\Hyper-V Hypervisor Partition(*)\*" "\Hyper-V Hypervisor Root Partition(*)\*" "\Hyper-V Hypervisor Root Virtual Processor(*)\*" "\Hyper-V Hypervisor Virtual Processor(*)\*" "\Hyper-V Virtual IDE Controller (Emulated)(*)\*" "\Hyper-V Virtual Storage Device(*)\*" "\LogicalDisk(*)\*" "\Memory\*" "\Network Adapter(*)\*" "\Paging File(*)\*" "\PhysicalDisk(*)\*" "\Process(*)\*" "\Processor Information(*)\*" "\RDMA Activity(*)\*" "\ReFS(*)\*" "\SMB Client Shares(*)\*" "\SMB Direct Connection(*)\*" "\SMB Server\*" "\SMB Server Sessions(*)\*" "\SMB Server Shares(*)\*" "\Storage Spaces Drt(*)\*" "\Storage Spaces Virtual Disk(*)\*" "\Storage Spaces Write Cache(*)\*" "\System\*" -si 00:00:02)"+"$(logman start Full-Short)"}}


Tím se vytvoří čítač perfmon na každém uzlu clusteru a spustí se perfmon protokolování. Jakmile uplyne dostatek času na to, aby došlo k problému s výkonem, zastavte perfmon pomocí následujícího příkazu:

#Stop logmasn trace
(Get-ClusterNode).Name | % {Invoke-Command -ComputerName $_ -ScriptBlock {"$(logman stop Full-Short)"}}



Po shromáždění všech potřebných dat perfmon odeberte čítač perfmon pomocí následujícího příkazu:

#Remove logman trace
(Get-ClusterNode).Name | % {Invoke-Command -ComputerName $_ -ScriptBlock {"$(logman Delete Full-Short)"}}


Pokud je potřeba shromáždit více protokolů: 
wpr -start CPU -start FileIO -start GeneralProfile -start MiniFilter     
(For 10 seconds when issue is happening.)
wpr -stop C:\PerfLogs\Admin\wpr.etl

해당 제품

Microsoft Windows Server 2016, Microsoft Windows Server 2019, Microsoft Windows Server 2022, Microsoft Windows 2008 Server R2, Microsoft Windows 2008 Server Service Pack 2, Microsoft Windows 2012 Server, Microsoft Windows 2012 Server R2

제품

Microsoft Hyper-V™ Server 2008, Microsoft Windows Small Business Server 2008, Microsoft Windows Small Business Server 2011 Essentials, Microsoft Windows Small Business Server 2008, Microsoft Windows Essential Business Server 2008
문서 속성
문서 번호: 000193585
문서 유형: How To
마지막 수정 시간: 05 9월 2025
버전:  7
다른 Dell 사용자에게 질문에 대한 답변 찾기
지원 서비스
디바이스에 지원 서비스가 적용되는지 확인하십시오.