Dell Networking Force10 OS9 How to Configure a Switch as an FTP Server
요약: This article explains how to use DELL OS9 switch as an FTP server for uploading or downloading files from a local flash.
이 문서는 다음에 적용됩니다.
이 문서는 다음에 적용되지 않습니다.
이 문서는 특정 제품과 관련이 없습니다.
모든 제품 버전이 이 문서에 나와 있는 것은 아닙니다.
지침
Dell Networking OS9 supports an FTP server function. This can be used for transferring a file like a core dump or packet capture in a switch to a local machine and back.
Sample configuration
Configuration Syntax
We use utilities like winscp to access the switch using FTP.
Sample configuration
DELLEMC# DELLEMC#configure DELLEMC(conf)#ftp-server topdir flash: DELLEMC(conf)#ftp-server username <username> password <password> DELLEMC(conf)#ftp-server enable
NOTE: The FTP user gets both read and write permission to the directory specified in ftp-server topdir. We can copy a file in to and out of the switch.
Configuration Syntax
| Command | Syntax |
|---|---|
DELLEMC#configure |
Enter configure mode. |
DELLEMC(conf)#ftp-server enable |
Enable FTP server Function. |
DELLEMC(conf)#ftp-server username <username> password <password> |
Configure an FTP username and password. The username and password can be 40 Characters long. |
DELLEMC(conf)#ftp-server username <username> password 7 <password> |
7 Specifies a HIDDEN password as follows. The password is encrypted in configuration (Optional). |
DELLEMC(conf)#ftp-server topdir flash: |
Specify the directory FTP is to access. If nothing is specified |
DELLEMC(conf)# ftp-server vrf <any/management> |
(Optional) Specify any to allow FTP server access to any vrf. Management is used when FTP server access is limited to management vrf. |
We use utilities like winscp to access the switch using FTP.
해당 제품
OS9문서 속성
문서 번호: 000211113
문서 유형: How To
마지막 수정 시간: 31 1월 2024
버전: 2
다른 Dell 사용자에게 질문에 대한 답변 찾기
지원 서비스
디바이스에 지원 서비스가 적용되는지 확인하십시오.