PowerEdge: Operation Not Permitted returned on PCI Bridge Root Ports with lspci command on 16G Intel based servers
요약: The issue is cosmetic. There is no functional impact. The lspci -v command requires certain labels to read. Labels are missing from the current Basic Input Output System (BIOS) but are added to June block BIOS v2.2.4. ...
이 문서는 다음에 적용됩니다.
이 문서는 다음에 적용되지 않습니다.
이 문서는 특정 제품과 관련이 없습니다.
모든 제품 버전이 이 문서에 나와 있는 것은 아닙니다.
증상
Using the lspci command with the verbose option returns operation not permitted on Intel Peripheral Component Interconnect (PCI) bridge root ports. The following is an excerpt of the overall output from the lspci -v command.
00:0a.0 PCI bridge: Intel Corporation Device 1bba (rev 11) (prog-if 00 [Normal decode]) pcilib: Error reading /sys/bus/pci/devices/0000:00:0a.0/label: Operation not permitted Flags: bus master, fast devsel, latency 0, IRQ 135, NUMA node 0 Memory at 20fffff40000 (64-bit, non-prefetchable) [size=128K] Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: [disabled] Memory behind bridge: 95a00000-95afffff [size=1M]
All supported Red Hat, SUSE Linux, and Ubuntu operating systems exhibit this symptom.
Affected Servers:
- R660
- R760
- R660xs
- R760xs
- R760xd2
- R760xa
Affected BIOS: v2.1.5 and earlier
원인
The BIOS is missing label information from Intel PCI bridge root ports.
해결
The root cause for this issue is known and is fixed in BIOS v2.2.4.
This issue is cosmetic. There is no functional impact.
해당 제품
SUSE Linux Enterprise Server 12, PowerEdge R660, PowerEdge R660xs, PowerEdge R760, PowerEdge R760XA, PowerEdge R760xd2, PowerEdge R760xs, Red Hat Enterprise Linux Version 7, Red Hat Enterprise Linux Version 9, Red Hat Enterprise Linux Version 8
, SUSE Linux Enterprise Server 15, Ubuntu Server LTS
...
제품
PowerEdge R860, PowerEdge R960문서 속성
문서 번호: 000223577
문서 유형: Solution
마지막 수정 시간: 01 5월 2025
버전: 2
다른 Dell 사용자에게 질문에 대한 답변 찾기
지원 서비스
디바이스에 지원 서비스가 적용되는지 확인하십시오.