NetWorker: DDBOOST_USER' does not have sufficient access rights, no issues observed with ddboost user account.

요약: DDBOOST_USER' does not have sufficient access rights is seen from NetWorker side even though DDBOOST user is working fine from DD side and also if you tried to change PW, assign new Storage Unit it encounters same error "DDBOOST_USER' does not have sufficient access rights" ...

이 문서는 다음에 적용됩니다. 이 문서는 다음에 적용되지 않습니다. 이 문서는 특정 제품과 관련이 없습니다. 모든 제품 버전이 이 문서에 나와 있는 것은 아닙니다.
기타 리소스 확인

증상

The following error appears while trying to create or mount a Data Domain device in NetWorker:

Unable to connect to 'DD_NAME' because user 'DDBOOST_USERNAME' does not have sufficient access right.

 

The following conditions are true:

  • You can log in to the PowerProtect Data Domain web UI using the same ddboost user account. Validating that the correct password is known. https://DATADOMAIN_ADDRESS/ddem
  • You have updated the device's ddboost credentials with the same password used to access the web UI.
  • From the DD Web UI, go to Administration -> Local Access -> Local Users, the ddboost user account is enabled.
  • From the DD Web UI, go to Protocols -> DD Boost. DD Boost is enabled and running.

원인

The issue is DD Boost client access issue. The DD contains (or was updated to contain) Encryption, and Authentication settings had been configured for DD Boost.

The ddfs.info log on the Data Domain shows the following error coinciding with the NetWorker ddboost access attempt:

09/02 14:59:42.999817 [b7e3c10] WARNING: Client DDBOOST_USER did not match access list entries
09/02 14:59:42.999839 [b7e3c10] nfsproc3_ost_mnt_3_svc: client access denied for IP x.x.x.x version x.x
NOTE: The ddfs.info log is captured when collecting a Data Domain Support Bundle. Go to Maintenance -> Support -> Support Bundles and click Generate Support Bundle. Use the Full Bundle option and ensure that date range captures time period where the ddboost error was observed.

해결

Hosts directly accessing the Data Domain over DD Boost must be added to the DD Boost "clients" list in Data Domain.

UI Method:

  1. Log in to the DD Web UI as an admin user; for example, sysadmin.
  2. Go to Protocols -> DD Boost
  3. Under Settings, click the plus (+) icon next to Clients.
  4. Add the client addresses requiring DD Boost access.

Command-Line Method:

  1. Open an SSH session to the Data Domain and log in as sysadmin.
  2. Add the hosts requiring DD Boost access using the following command:

    ddboost clients add CLIENT-ADDRESS

해당 제품

Data Domain, NetWorker
문서 속성
문서 번호: 000263089
문서 유형: Solution
마지막 수정 시간: 07 1월 2026
버전:  1
다른 Dell 사용자에게 질문에 대한 답변 찾기
지원 서비스
디바이스에 지원 서비스가 적용되는지 확인하십시오.