PowerEdge: MX7000 Fan Warning after Installing MX760c Sleds

Samenvatting: Fan warning messages in Open Manage Enterprise: Modular (OME-M) after installing MX760c sleds into MX7000 chassis after point of sale (APOS).

Dit artikel is van toepassing op Dit artikel is niet van toepassing op Dit artikel is niet gebonden aan een specifiek product. Niet alle productversies worden in dit artikel vermeld.
Bekijk andere hulpbronnen

Symptomen

This is an example of the fan warning message, but it is seen on all fans included with the chassis. 
=====================================================
Front fan 1 requires attention for optimal performance.
Desc: A device in the chassis requires a fan type that does not match the configuration of the fan identified in the message. Some devices may experience varied performance and possible thermal errors depending on the configuration, workload, and environment.
Action: Replace the fan with a Gen2 fan during the next scheduled service. Dell recommends as soon as possible for optimal performance. For more information about recommended fan configurations, see the MX7000 User's Guide available on the support site.
=====================================================

Oorzaak

The thermal and power optimization requirements for an MX7000 with MX760C sleds that require an optimized chassis were not checked before buying and installing the sleds.

Oplossing

The following upgrades on the MX7000 chassis must be followed when installing MX760C sleds after point of sale:

  • MX7000 Gold grade (hardware version 2, Gen2) fans (customer kit PN: H2YC5/SKU: SKU 750-ADWN; included with MX solution orders with MX760c)
  • Open Manage Enterprise - Modular (OME-M) Firmware version 2.00.00
  • iDRAC version 05.10.25 or 06.10.05
  • Enterprise Infrastructure Planning Tool (EIPT)
NOTE: When selecting or upgrading the system configuration, verify the system power consumption with the Enterprise Infrastructure Planning Tool to ensure optimum power utilization.
 
NOTE: To generate the thermally optimized sled-to-slot assignments, enter the MX configuration in the EIPT tool and click Optimize.


See the MX760c Installation and Service Manual available on Dell Support Product Page for complete information. 

Getroffen producten

PowerEdge MX7000, PowerEdge MX760c
Artikeleigenschappen
Artikelnummer: 000215534
Artikeltype: Solution
Laatst aangepast: 07 mei 2026
Versie:  4
Vind antwoorden op uw vragen via andere Dell gebruikers
Support Services
Controleer of uw apparaat wordt gedekt door Support Services.