Cloudboost: How to Adjust Average Chunk SIZE

Summary: CloudBoost 2.2.2 adds the hidden avgchunksize command, letting admins view or change the average chunk size (up to 1 MB) by “avgchunksize show” or “avgchunksize change SIZE”, which reboots the system. ...

Acest articol se aplică pentru Acest articol nu se aplică pentru Acest articol nu este legat de un produs specific. Acest articol nu acoperă toate versiunile de produs existente.
Consultați alte resurse

Instructions

With the release of CloudBoost 2.2.2, you can now change the average chunk size used within CloudBoost with the command avgchunksize.

  • Syntax:  
avgchunksize <show|change SIZE>
  • To show the current average chunk size, use avgchunksize show.
    Example:  
admin@mag-fs> avgchunksize show
  • Current average chunk size: 256 KB
  • To change the current average chunk size, use avgchunksize change #, where # is the size in KB.  
    Example: 
admin@mag-fs> avgchunksize change 1024
This command will restart the appliance! Are you sure?
To CONTINUE please type "Yes"
Yes

The system is going down for reboot NOW!
100% done. Status: Changed averageChunkSize from 256 to 1024 KB in Share
Changing average chunk size of share: success

Additional Information

  1. avgchunksize is a hidden command.
  2. Max average chunk size supported is 1MB, which could lead to max chunk size of 4MB. 

Produse afectate

CloudBoost

Produse

CloudBoost Virtual Appliance
Proprietăți articol
Article Number: 000003763
Article Type: How To
Ultima modificare: 10 mar. 2026
Version:  5
Găsiți răspunsuri la întrebările dvs. de la alți utilizatori Dell
Servicii de asistență
Verificați dacă dispozitivul dvs. este acoperit de serviciile de asistență.