Data Domain: Replication Context is Disabled Due to Potential NVRAM Loss

Summary: This article explains why a Data Domain replication resync may fail with the error "this context is disabled due to potential nvram loss" and provides the required steps to resolve the issue. ...

Acest articol se aplică pentru Acest articol nu se aplică pentru Acest articol nu este legat de un produs specific. Acest articol nu acoperă toate versiunile de produs existente.

Symptoms

When running a replication resync command, the following error appears:

  • ERROR: repl ctx <ID>: this context is disabled due to potential nvram loss. 
    Please break replication on both source and destination, then reconfigure them and run replication resync.

The resync does not proceed.

Example:

# replication resync dir://hostname.FQDN/backup/dir4
The 'replication resync' command irrevocably removes the destination data that are different from the source. It will not be possible to recover the lost data.

Are you sure? (yes|no|?) [no]: yes
ok, proceeding.
(00:00) Waiting for resync to start...
(00:02) ERROR: repl ctx 1: this context is disabled due to potential nvram loss. Please break replication on both source and destination, then reconfigure them and run replication resync.
Resync will proceed when error is fixed.

Cause

The replication context is marked as disabled because the system detected a potential NVRAM loss condition.
When this state is detected, the system prevents resync operations to avoid propagating data inconsistencies.

Resolution

Additional Information

 

     

    Produse afectate

    Data Domain

    Produse

    Data Domain
    Proprietăți articol
    Article Number: 000043675
    Article Type: Solution
    Ultima modificare: 16 feb. 2026
    Version:  3
    Găsiți răspunsuri la întrebările dvs. de la alți utilizatori Dell
    Servicii de asistență
    Verificați dacă dispozitivul dvs. este acoperit de serviciile de asistență.