VxRail: Knooppunt ontbreekt op fysieke pagina vanwege uitgeschakelde CIM-agents en Wbem

Summary: VxRail-knooppunten kunnen van de pagina verdwijnen wanneer de VMK1-interface wordt verwijderd. Dit kan worden veroorzaakt door uitgeschakelde CIM-agents (Common Information Model) en een inactieve WBEM-service die providers blokkeert. ...

Acest articol se aplică pentru Acest articol nu se aplică pentru Acest articol nu este legat de un produs specific. Acest articol nu acoperă toate versiunile de produs existente.
Consultați alte resurse

Symptoms

Knooppunt ontbreekt in de fysieke paginaweergave (VMK1 verdwijnt automatisch).

Cause

CIM Agents zijn uitgeschakeld op het knooppunt.
 

Resolution

  1. Zorg ervoor dat wbem is ingeschakeld: esxcli system wbem get
  2. Als wbem is uitgeschakeld, schakelt u deze in met de opdracht: esxcli system wbem set enable true
  3. Controleer of alle wbem Providers worden geladen: localcli system wbem provider list 
    [root@node1:] localcli system wbem provider list
Name              Enabled  Loaded
---------------------------------
sfcb_base         true     true
vmw_base          true     true
vmw_dcism         true     true
vmw_hdr           true     true
vmw_iodmProvider  true     true
vmw_kmodule       true     true
vmw_omc           true     true
vmw_pci           true     true
  4. Indien van toepassing wbem providers worden niet geladen, inschakelen CIM gemachtigden (sfcbd-watchdog & wsman) met behulp van de onderstaande opdrachten. 
    [root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] chkconfig sfcbd-watchdog
sfcbd-watchdog          off
[root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] chkconfig sfcbd-watchdog on
[root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] /etc/init.d/sfcbd-watchdog status
sfcbd is not running
[root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] /etc/init.d/sfcbd-watchdog start
sfcbd-init: Getting Exclusive access, please wait...
sfcbd-init: Exclusive access granted.
sfcbd-init: Request to start sfcbd-watchdog, pid 2111224
sfcbd-config[2111234]: Configuration not changed, already enabled
sfcbd-init: starting sfcbd
sfcbd-init: Waiting for sfcb to start up.
sfcbd-init: Program started normally.
[root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] /etc/init.d/sfcbd-watchdog status
sfcbd is running
[root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] chkconfig wsman
wsman                   off
[root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] /etc/init.d/wsman status
openwsmand is not running
[root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] /etc/init.d/wsman start
openwsmand: Getting Exclusive access, please wait...
openwsmand: Exclusive access granted.
openwsmand: Starting openwsmand
[root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] /etc/init.d/wsman status
openwsmand is running
[root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] chkconfig wsman
wsman                   off
[root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] chkconfig wsman on
  5. Controleer of vmk1 nu op het knooppunt is gemaakt.
  6. Controleer de fysieke pagina en het knooppunt is in orde.

Produse afectate

VxRail, VxRail 460 and 470 Nodes, VxRail Appliance Series, VxRail G Series Nodes, VxRail D Series Nodes, VxRail E Series Nodes, VxRail P Series Nodes, VxRail S Series Nodes, VxRail Software, VxRail V Series Nodes, VxRail VD Series Nodes
Proprietăți articol
Article Number: 000049893
Article Type: Solution
Ultima modificare: 23 dec. 2025
Version:  4
Găsiți răspunsuri la întrebările dvs. de la alți utilizatori Dell
Servicii de asistență
Verificați dacă dispozitivul dvs. este acoperit de serviciile de asistență.