NetWorker: nsrexecd failed to start on the client active node of MSSQL cluster
Summary: This article explains the solution when nsrexecd failed to start on the client active node of MSSQL cluster.
Acest articol se aplică pentru
Acest articol nu se aplică pentru
Acest articol nu este legat de un produs specific.
Acest articol nu acoperă toate versiunile de produs existente.
Symptoms
Client migrated from TSM to NetWorker
NetWorker client 8.2.x
MSSQL 2012
Windows 2012 R2
Microsoft Cluster
NetWorker nsrexecd running fine on the passive node of the cluster
NetWorker nsrexecd failed to start on the active node of the cluster.
From the NetWorker client daemon.raw, the ..\nsr\bin\lcmap hanging during the start and then failed
NetWorker client 8.2.x
MSSQL 2012
Windows 2012 R2
Microsoft Cluster
NetWorker nsrexecd running fine on the passive node of the cluster
NetWorker nsrexecd failed to start on the active node of the cluster.
From the NetWorker client daemon.raw, the ..\nsr\bin\lcmap hanging during the start and then failed
Cause
Improper NetWorker installation on the client caused the lcmap fail to start
Resolution
Rename the ..\nsr\bin\lcmap to lcmap.RTM and restart the services.
Produse afectate
NetWorkerProprietăți articol
Article Number: 000061828
Article Type: Solution
Ultima modificare: 12 dec. 2025
Version: 4
Găsiți răspunsuri la întrebările dvs. de la alți utilizatori Dell
Servicii de asistență
Verificați dacă dispozitivul dvs. este acoperit de serviciile de asistență.