How to Build a Partition for Dell BitLocker Manager

Summary: Learn how to create a preboot authentication (PBA) partition may be created for Dell BitLocker Manager by following these instructions.

Acest articol se aplică pentru Acest articol nu se aplică pentru Acest articol nu este legat de un produs specific. Acest articol nu acoperă toate versiunile de produs existente.

Instructions

This article provides steps to build a PBA partition for Dell BitLocker Manager (formerly Dell Data Protection BitLocker Manager).


Affected Products:

  • Dell BitLocker Manager
  • Dell Data Protection BitLocker Manager

Affected Operating Systems:

  • Windows

Dell BitLocker Manager requires a PBA partition to securely unlock the operating system. Select the appropriate section below for steps to Create or Validate that a PBA partition has been created.

Create

  1. Type CMD into the Windows search bar.
    Accessing Command Prompt
  2. Right-click Command Prompt and then click Run as administrator.
    Running Command Prompt as administrator
  3. Type BdeHdCfg -target default and then press Enter.
    BitLocker Drive Preparation Tool
  4. Type Y and then press Enter.
    Continue
  5. Type shutdown -r -t 0 and then press Enter to reboot the endpoint.
    Shutdown

Validate

  1. Right-click the Windows Start menu and then click Run.
    Run
  2. From Run, type diskmgmt.msc and then click OK.
    Run UI
  3. Confirm that a new partition has been created.
    Checking partitions

To contact support, reference Dell Data Security International Support Phone Numbers.
Go to TechDirect to generate a technical support request online.
For additional insights and resources, join the Dell Security Community Forum.

Produse afectate

Dell Encryption
Proprietăți articol
Article Number: 000131537
Article Type: How To
Ultima modificare: 07 iul. 2025
Version:  11
Găsiți răspunsuri la întrebările dvs. de la alți utilizatori Dell
Servicii de asistență
Verificați dacă dispozitivul dvs. este acoperit de serviciile de asistență.