DLMF: Dialhome received with error: DLmV0198E: Get SEL Info command failed
Summary: dial home received with error DLMF-DLmV0198E-Get-SEL-Info-command-failed on VTE1
Acest articol se aplică pentru
Acest articol nu se aplică pentru
Acest articol nu este legat de un produs specific.
Acest articol nu acoperă toate versiunile de produs existente.
Symptoms
Dial home received with error message:
LMF-DLmV0198E-Get-SEL-Info-command-failed
This is seen at DLm Release 5.0.3 through 5.1.1, but may affect more versions.
Check /var/log/messages on that VTE:
vte1:/var/log # cat /var/log/messages | grep "Get SEL"
2020-05-07T15:22:51.616010-04:00 vte1 ipmievd: Get SEL Info command failed
2020-05-07T15:23:16.630471-04:00 vte1 ipmievd: Get SEL Info command failed
2020-05-07T15:23:41.642472-04:00 vte1 ipmievd: Get SEL Info command failed
2020-05-07T15:24:06.654503-04:00 vte1 ipmievd: Get SEL Info command failed
2020-05-07T15:24:18.674316-04:00 vte1 ipmievd: Get SEL Info command failed: Unspecified error
2020-05-07T15:24:28.674396-04:00 vte1 ipmievd: Get SEL Info command failed: Node busy
2020-05-07T15:24:38.674516-04:00 vte1 ipmievd: Get SEL Info command failed: Node busy
2020-05-07T15:24:48.674616-04:00 vte1 ipmievd: Get SEL Info command failed: Node busy
2020-05-07T15:24:58.674727-04:00 vte1 ipmievd: Get SEL Info command failed: Node busy
2020-05-07T15:25:08.674831-04:00 vte1 ipmievd: Get SEL Info command failed: Node busy
2020-05-07T15:25:18.674939-04:00 vte1 ipmievd: Get SEL Info command failed: Node busy
2020-05-07T15:25:28.675063-04:00 vte1 ipmievd: Get SEL Info command failed: Node busy
2020-05-07T15:25:38.675167-04:00 vte1 ipmievd: Get SEL Info command failed: Node busy
vte1:/var/log #
2020-05-07T15:22:51.616010-04:00 vte1 ipmievd: Get SEL Info command failed
2020-05-07T15:23:16.630471-04:00 vte1 ipmievd: Get SEL Info command failed
2020-05-07T15:23:41.642472-04:00 vte1 ipmievd: Get SEL Info command failed
2020-05-07T15:24:06.654503-04:00 vte1 ipmievd: Get SEL Info command failed
2020-05-07T15:24:18.674316-04:00 vte1 ipmievd: Get SEL Info command failed: Unspecified error
2020-05-07T15:24:28.674396-04:00 vte1 ipmievd: Get SEL Info command failed: Node busy
2020-05-07T15:24:38.674516-04:00 vte1 ipmievd: Get SEL Info command failed: Node busy
2020-05-07T15:24:48.674616-04:00 vte1 ipmievd: Get SEL Info command failed: Node busy
2020-05-07T15:24:58.674727-04:00 vte1 ipmievd: Get SEL Info command failed: Node busy
2020-05-07T15:25:08.674831-04:00 vte1 ipmievd: Get SEL Info command failed: Node busy
2020-05-07T15:25:18.674939-04:00 vte1 ipmievd: Get SEL Info command failed: Node busy
2020-05-07T15:25:28.675063-04:00 vte1 ipmievd: Get SEL Info command failed: Node busy
2020-05-07T15:25:38.675167-04:00 vte1 ipmievd: Get SEL Info command failed: Node busy
vte1:/var/log #
Cause
Failure to disconnect virtual media during after the manufacturing process.
Resolution
In the cases examined, the issue occurred and stopped within seconds and did not repeat the same day. Further checking confirmed it did not repeat within the next 7 days.
Workaround:
Check if VTE iDRAC has Virtual Media attached on the VTE where the ipmievd error occurred by running the below command:
# racadm get idrac.Virtualmedia.attached
Examples:
If Virtual Media is *not* attached:
A workaround (non disruptive iDRAC internal settings modification only) to prevent further occurrence, is to detach Virtual Media. Execute the following on the VTE with the error:
Workaround:
Check if VTE iDRAC has Virtual Media attached on the VTE where the ipmievd error occurred by running the below command:
# racadm get idrac.Virtualmedia.attached
Examples:
If Virtual Media is attached:
vte1:~ # racadm get idrac.Virtualmedia.attached
[Key=idrac.Embedded.1#VirtualMedia.1]
Attached=Attached
[Key=idrac.Embedded.1#VirtualMedia.1]
Attached=Attached
If Virtual Media is *not* attached:
vte1:~ # racadm get idrac.Virtualmedia.attached
[Key=idrac.Embedded.1#VirtualMedia.1]
Attached=AutoAttach OR Attached=Detached
[Key=idrac.Embedded.1#VirtualMedia.1]
Attached=AutoAttach OR Attached=Detached
A workaround (non disruptive iDRAC internal settings modification only) to prevent further occurrence, is to detach Virtual Media. Execute the following on the VTE with the error:
vte1:~ # racadm set idrac.Virtualmedia.attached 0
[Key=idrac.Embedded.1#VirtualMedia.1]
Object value modified successfully
Verify:o
vte1:~ # racadm get idrac.Virtualmedia.attached
[Key=idrac.Embedded.1#VirtualMedia.1]
Attached=Detached
[Key=idrac.Embedded.1#VirtualMedia.1]
Object value modified successfully
Verify:o
vte1:~ # racadm get idrac.Virtualmedia.attached
[Key=idrac.Embedded.1#VirtualMedia.1]
Attached=Detached
Produse afectate
Disk Library for mainframeProduse
Disk Library for mainframe, Disk Library for mainframe DLm8500, Disk Library for mainframe SoftwareProprietăți articol
Article Number: 000173590
Article Type: Solution
Ultima modificare: 20 nov. 2020
Version: 2
Găsiți răspunsuri la întrebările dvs. de la alți utilizatori Dell
Servicii de asistență
Verificați dacă dispozitivul dvs. este acoperit de serviciile de asistență.