VxBlock: Cisco NexusスイッチでのTCAM使用のガイドライン

Summary: この記事では、TCAMの使用に関する問題のガイドラインについて説明します。

Acest articol se aplică pentru Acest articol nu se aplică pentru Acest articol nu este legat de un produs specific. Acest articol nu acoperă toate versiunile de produs existente.

Instructions

ファクト:
  • シスコNexus 9000
  • TCAM

情報:

TCAM使用の問題:
例:お客様は、HSRP 分離をサポートする MAC PACL を作成したいと考えています。TCAMスペースをmac-ifacl リージョンに割り当てようとすると、次のエラーが表示されます。 
# hardware access-list tcam region mac-ifacl 256
ERROR: Aggregate TCAM region configuration exceeded the available Ingress TCAM slices. Please re-configure.

お客様の現在のデフォルトTCAM使用率:
# sh sys int acce globals | egrep -i '[0-9]+ +[0-9]+ +[1-9][0-9]+|--' 
---------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------- 
---------------------------------------------------------------------------------------------                              IPV4 PACL [ifacl](   1)       3        0      512        1                            IPV4 Port QoS [qos](   4)       6     3072      256        2                               IPV4 VACL [vacl](  13)      15      512      512        1                               IPV4 RACL [racl](  19)      21     1024      512        1                                 Ingress System(  37)       1     2048      256        2                                    SPAN [span](  39)       2     3584      256        1                            Ingress COPP [copp](  40)      40     2560      256        2                            Redirect [redirect](  44)      46     1536      512        1 
VPC Convergence/ES-Multi Home [vpc-convergence]( 54)      57     4096      256        1


推奨事項1: 
必要な mac-ifacl 機能は、2 倍サイズのブロックです。これには、256バイトまたは512バイトのスライスが2つ必要です

現在の設定から、IPv4 Port QoS [qos]を使用していないことに注意してください。そのダブルサイズの機能を取得し、2つのコマンドでmac-ifaclに割り当てることができます。
# hardware access-list tcam region qos 0
WARNING: On module 1, 4 entries are in use in the region IPV4 Port QoS [qos] on instance 0, but carving size is 0 [0*2].
Warning: Please save config and reload the system for the configuration to take effect
 
# hardware access-list tcam region mac-ifacl 256
Warning: Please save config and reload the system for the configuration to take effect
リロード後:
9396-a# sh sys int acce globals | egrep -i '[0-9]+ +[0-9]+ +[1-9][0-9]+|--'

                             IPV4 PACL [ifacl](   1)       3        0      512
      1
                          MAC PACL [mac-ifacl](   3)       5     3072      256
      2
                              IPV4 VACL [vacl](  13)      15      512      512
      1
                              IPV4 RACL [racl](  19)      21     1024      512
      1
                                Ingress System(  37)       1     2048      256
      2
                                   SPAN [span](  39)       2     3584      256
      1
                           Ingress COPP [copp](  40)      40     2560      256
      2
                           Redirect [redirect](  44)      46     1536      512
      1
VPC Convergence/ES-Multi Home [vpc-convergence]( 54)      57     4096      256

両方の機能が構成されています。目標を達成するには、このテンプレートに従ってください。

 

推奨事項2:
RACL から 2 つの 512 スライスを取得し、その領域を mac-ifacl に割り当てます。これにより、使用可能な 256 スライスが得られ、その使用可能なスライスを他のシングル幅フィーチャに割り当てることができます。


推奨事項3:
もう 1 つの可能性は、SPAN を 0 に設定することです。これにより、2 つの 256 バイトのスライスが残り、ダブル幅機能 mac-ifacl に割り当てることができます。

Produse afectate

VxBlock and Vblock Systems, Networking
Proprietăți articol
Article Number: 000207091
Article Type: How To
Ultima modificare: 20 nov. 2025
Version:  2
Găsiți răspunsuri la întrebările dvs. de la alți utilizatori Dell
Servicii de asistență
Verificați dacă dispozitivul dvs. este acoperit de serviciile de asistență.