PowerProtect Data Manager:无法创建存储单元,错误代码为 CFG0001
Summary: 无法创建存储单元,错误代码为 CFG0001
Acest articol se aplică pentru
Acest articol nu se aplică pentru
Acest articol nu este legat de un produs specific.
Acest articol nu acoperă toate versiunile de produs existente.
Symptoms
创建新策略时,无法创建存储单元。
从 UI:
从 UI:
CFG0001: xxx: Unable to configure the protection policy because of the following error: Failed to connect to PowerProtect DD System. errorNum: 5007 errorMessage: operation is not implemented从作业日志中:
ddboost.log: 2023-08-11T23:15:17.931Z ERROR [] [pool-26-thread-1] [00000000-0000-4000-b000-000000000000][][][TRACE_ID:81a3388041e49793;JOB_ID:9ea4884359c07119][plc.id:2eab4e3d,asset.id:,pcs.id:] ddboost.log(52) - severity:1 msg:[D688:7FF690077BA0] ddp_connect_with_config() failed, Hostname: xxx, Err: 5007-nfs ddp getinfo failed (nfs: Operation not supported)已确认不存在网络问题、证书问题,并且已在使用 sysadmin 添加 Data Domain(发现工作正常)。
Cause
Data Domain NFS 服务处于禁用状态。
Resolution
在 Data Domain UI 上,单击“ENABLE”以启用 NFSv3。
Produse afectate
PowerProtect Data Manager, PowerProtect SoftwareProprietăți articol
Article Number: 000216695
Article Type: Solution
Ultima modificare: 18 mai 2026
Version: 6
Găsiți răspunsuri la întrebările dvs. de la alți utilizatori Dell
Servicii de asistență
Verificați dacă dispozitivul dvs. este acoperit de serviciile de asistență.