NetWorker: NetWorker server deployed on Red Had Enterprise Linux Pacemaker failover cluster have no method of tuning the monitoring interval.

• The NetWorker server is installed on a Red Hat Pacemaker (pcs) failover cluster.
• There are intermittent outages in NetWorker due to brief interruptions to the Pacemaker (pcs) resource for NetWorker server (default is nws)

The cause of cluster outages can vary. This section defines what is used to perform NetWorker cluster monitor functions. 

By default the Pacemaker resource for NetWorker has a "monitor" operation. The operation has "interval" and "timeout" settings which are configured by the cluster administrator during initial NetWorker cluster configuration.

root@NWrhelNodeA:~# pcs resource
  * Resource Group: NW_group:
    * fs        (ocf::heartbeat:Filesystem):     Started NWrhelNodeA.emclab.local
    * ip        (ocf::heartbeat:IPaddr):         Started NWrhelNodeA.emclab.local
    * nws       (ocf::EMC_NetWorker:Server):     Started NWrhelNodeA.emclab.local
root@NWrhelNodeA:~# pcs resource config nws
 Resource: nws (class=ocf provider=EMC_NetWorker type=Server)
  Meta Attrs: is-managed=true
  Operations: meta-data interval=0 timeout=10 (nws-meta-data-interval-0)
              migrate_from interval=0 timeout=120 (nws-migrate_from-interval-0)
              migrate_to interval=0 timeout=60 (nws-migrate_to-interval-0)
              start interval=0 timeout=300 (nws-start-interval-0)
              stop interval=0s timeout=300 (nws-stop-interval-0s)
              validate-all interval=0 timeout=10 (nws-validate-all-interval-0)
              monitor interval=120s timeout=300 (nws-monitor-interval-120s)

NetWorker is configured to use Open Cluster Framework (OCF). The monitoring function is defined in /usr/lib/ocf/resource.d/EMC_NetWorker/Server:

NWServer_monitor() {
        local count

        # exit immediately if configuration is not valid
        NWServer_validate_all || exit $?

        quick_monitor
        if [ $? -eq 0 ]; then
                count=0
                while [ $count -lt 3 ]; do
                        echo "q" | nsradmin -s ${NSR_SERVERHOST} -i - > /dev/null 2>&1
                        if [ $? -eq 0 ]; then
                                return $OCF_SUCCESS
                        else
                                count=`expr ${count} + 1`
                                sleep 1
                        fi
                done
        else
                return $OCF_NOT_RUNNING
        fi

        return $OCF_NOT_RUNNING
}

The cluster administrator should investigate all cluster outage issues. The cluster logs can be reviewed for any details on interruptions:

• /var/log/pcsd/pcsd.log
• /var/log/pacemaker/pacemaker.log
• /var/log/messages

NetWorker server logs can also be reviewed. The NetWorker server's daemon.log is located on the shared disk (for example, /nsr_share).

• /nsr_share/nsr/logs/daemon.log

If real-time rendering is not enabled, the .raw log can be rendered into an .log file with the following command:

nsr_render_log /nsr_share/nsr/logs/daemon.raw > /nsr_share/nsr/logs/daemon_`date -I`.log

The cluster administrator can increase the monitor interval and timeout values for the NetWorker server pcs resource. See Red Hat Pacemaker documentation for directions on changing the timeout values as Pacemaker commands may change across Pacemaker versions.

By default, the Pacemaker retries the monitor function three times. If you would like for this to be a tunable parameter, contact your Dell account or sales representative to open a Request for Enhancement (RFE).

The /usr/lib/ocf/resource.d/EMC_NetWorker/Server nsr_monitor function can be modified by the cluster administrator to include additional functions; however, this scripting is outside of NetWorker support. Any changes to these scripts are removed during a NetWorker server upgrade.