Windows 2016 上的 PowerPath for Windows 6.1 报告驱动程序版本低于作系统版本
摘要: 在 Windows Server 2016 上安装 PowerPath for Windows 版本 6.1 时,验证警报会指示许多驱动程序的日期早于作系统,因为 PowerPath 版本早于作系统。
本文适用于
本文不适用于
本文并非针对某种特定的产品。
本文并非包含所有产品版本。
症状
在 Windows 2016 上安装 PowerPath for Windows 6.1 后,我们在群集验证期间看到以下警报:
The following drivers are older than the installed version of the Operating System: EMC PowerPath Data Migration Manager: 10/17/2016 12:00:00 AM EMC PowerPath DSM for CLARiiON: 9/27/2016 12:00:00 AM EMC PowerPath DSM for DELL SC: 10/17/2016 12:00:00 AM EMC PowerPath DSM for Generic: 9/27/2016 12:00:00 AM EMC PowerPath DSM for Invista: 9/27/2016 12:00:00 AM EMC PowerPath DSM for Symmetrix: 9/27/2016 12:00:00 AM EMC PowerPath DSM for XtremIO: 9/27/2016 12:00:00 AM EMC PowerPath Generic Purpose Extension: 10/17/2016 12:00:00 AM EMC PowerPath Multipath Extension: 11/20/2016 12:00:00 AM EMS Device Bus: 11/7/2016 12:00:00 AM HP FlexFabric 10Gb 2-port 554M Adapter: 8/27/2016 12:00:00 AM HP FlexFabric 10Gb 2-port 554M Adapter: 8/9/2016 12:00:00 AM iLO 4 (CHIF): 7/29/2016 12:00:00 AM Matrox G200eh (HP) WDDM 2.0: 7/12/2016 12:00:00 AM PowerPath Devices: 9/27/2016 12:00:00 AM
原因
PowerPath for Windows 6.1 的发布日期为 2016 年 9 月和 10 月,早于 Windows 2016 日期。
解决方案
无需解决,该警报仅供参考。
PowerPath 6.1 符合条件,完全受 Windows Server 2016 支持。
提醒:PowerPath 6.1 现已停售,建议升级到 PowerPath 6.3 或更高版本。
受影响的产品
Storage Networking, Enterprise Storage文章属性
文章编号: 000062991
文章类型: Solution
上次修改时间: 03 2月 2026
版本: 7
从其他戴尔用户那里查找问题的答案
支持服务
检查您的设备是否在支持服务涵盖的范围内。