Isilon: A100 Boot Drive in SMARTFAIL

摘要: If one of the boot drives in an A100 node shows with a SMARTFAIL status, do not wait for SmartFail to complete.

本文适用于 本文不适用于 本文并非针对某种特定的产品。 本文并非包含所有产品版本。
查看其他资源

症状



A drive in an A100 node goes into a SMARTFAIL state and stays in that state indefinitely, never changing to REPLACE. Flexprotect does not run.

Output from 'isi devices' looks similar to:

Node 7, [ATTN]
  Bay 1        Lnum N/A     [HEALTHY]      SN:JPWxxxxxxx    /dev/ad0   
  Bay 2        Lnum N/A     [SMARTFAIL]    SN:JPWxxxxxxxx    /dev/ad2

原因

The issue is caused by a bug in OneFS. The OS is attempting to treat the boot drive as a data drive, but boot drives cannot be smartfailed as there is no customer data on these drives to restripe. Running FlexProtect does not affect these drives. The drive should never go into SMARTFAIL, but instead go directly into the REPLACE state.

解决方案

There is no need to wait for the SmartFail process to complete or for the drive to go into REPLACE status on A100 boot drives as there is no data to reprotect. 
Contact Dell EMC Support and open an SR to have the drive replaced.

受影响的产品

Isilon A100

产品

Isilon, Isilon A100
文章属性
文章编号: 000065775
文章类型: Solution
上次修改时间: 01 4月 2025
版本:  3
从其他戴尔用户那里查找问题的答案
支持服务
检查您的设备是否在支持服务涵盖的范围内。