DELL EMC Unity: The object was not found with "Pool0". (Error Code:0x1000401) error while creating Traditional Pool

摘要: DELL EMC Unity :The object was not found with "Pool0". (Error Code:0x1000401) error while creating Traditional Pool on OE 5.2.0 The object was not found with "Pool0". (Error Code:0x1000401) while creating Traditional Pool. ...

本文适用于 本文不适用于 本文并非针对某种特定的产品。 本文并非包含所有产品版本。
查看其他资源

症状

Errors reported while creating traditional pool using two different drive types from Dell EMC Unity GUI running OE code 5.2 are shown below:
"The wrong number of drives was supplied for the specified RAID configuration, or the number of drives did not match the default RAID configuration for the drives in the drive group. Error: Code (0x6700171)"


While trying to create the pool with different disk types the following error is expected:

uemcli -d <IP Address> -u Local/admin -p <Password> /stor/config/pool create -name <Pool Name> -diskGroup dg_26 -drivesNumber 45 -storProfile tprofile_2 -type traditional

uemcli -d <IP address> -u admin -securepassword /stor/config/profile -traditional -configurable show -storProfile tprofile_1, tprofile_19 -type traditional

Please input your selection (The default selection is [1]): Operation failed. Error code: 0x1000401
The object was not found with "Pool0". (Error Code:0x1000401)

 

原因

The traditional pool creation from GUI is not achievable from Dell EMC Unity OE code 5.2.0, the same can be configured only via CLI method using uemcli.
 

解决方案

As a first step, traditional pool with only flash drive or highest available tier (drive type) should be configured, once the pool has been successfully created it can be expanded further from Unisphere with either SAS or NL SAS disk.

Steps to configure traditional pool via CLI:

  1. uemcli /stor/config/dg show      >>Shows the Disk Groups available in the system 
  2. uemcli /stor/config/profile -traditional -configurable show >> Shows the profiles available in the system
  3. uemcli -d <IP Address> -u Local/admin -p <Password> /stor/config/pool create -name <Pool Name> -diskGroup <disk_group> -drivesNumber < drive_number > -storProfile tprofile_x -type traditional 


 

受影响的产品

Dell EMC Unity, Dell Unity 300, Dell EMC Unity 300F, Dell EMC Unity 350F, Dell EMC Unity 400, Dell EMC Unity 400F, Dell EMC Unity 450F, Dell EMC Unity 500, Dell EMC Unity 500F, Dell EMC Unity 550F

产品

Dell EMC Unity XT 380, Dell EMC Unity XT 380F, Dell EMC Unity 400F, Dell EMC Unity 450F, Dell EMC Unity XT 480, Dell EMC Unity XT 480F, Dell EMC Unity 500, Dell EMC Unity 500F, Dell EMC Unity 550F, Dell EMC Unity 600, Dell EMC Unity 600F , Dell EMC Unity 650F, Dell EMC Unity XT 680, Dell EMC Unity XT 680F, Dell EMC Unity XT 880, Dell EMC Unity XT 880F, Dell EMC Unity Family |Dell EMC Unity All Flash, Dell EMC Unity Family, Dell EMC Unity Hybrid, Dell EMC UnityVSA Professional Edition/Unity Cloud Edition ...
文章属性
文章编号: 000204906
文章类型: Solution
上次修改时间: 10 9月 2025
版本:  7
从其他戴尔用户那里查找问题的答案
支持服务
检查您的设备是否在支持服务涵盖的范围内。