Dell Unity: Replication transfers stop working (User Correctable)

摘要: How to deal with an event in which Replication transfers stopped.

本文适用于 本文不适用于 本文并非针对某种特定的产品。 本文并非包含所有产品版本。
查看其他资源

症状

Even though automatic synchronization by RPO is set in Replication, no transfer is being performed and the Last Sync Time is still out of date.
Although the transfer is not in progress, the Sync State is idle, and Health State is OK.

原因

The following are possible causes.
(1) There is some problem with the Snapshot to be transferred.
(2) When clearing the task of a JOB in manual sync is performed.

解决方案

(1) Resolution:
This issue is addressed in Unity OE 5.4.0.

Workaround:
Perform the following steps to delete the problematic snapshot from the Unisphere UI.
Pause replication > Delete a snapshot > Resume replication
 
NOTE: Contact Dell Technical Support if an error occurs during any of the steps.


(2) Pause and resume replication.

其他信息

Here is an example of a problematic Snapshot.

UI snapshots showing a snapshot offline and pending status

UI snapshots showing a snapshot offline and pending status
 

受影响的产品

Dell EMC Unity, Dell Unity 300, Dell EMC Unity 300F, Dell EMC Unity 350F, Dell EMC Unity XT 380, Dell EMC Unity XT 380F, Dell EMC Unity 400, Dell EMC Unity 400F, Dell EMC Unity 450F, Dell EMC Unity XT 480, Dell EMC Unity XT 480F, Dell EMC Unity 500 , Dell EMC Unity 500F, Dell EMC Unity 550F, Dell EMC Unity 600, Dell EMC Unity 600F, Dell EMC Unity 650F, Dell EMC Unity XT 680, Dell EMC Unity XT 680F, Dell EMC Unity XT 880, Dell EMC Unity XT 880F, Dell EMC Unity Family |Dell EMC Unity All Flash, Dell EMC Unity Family, Dell EMC Unity Hybrid, Dell EMC UnityVSA Professional Edition/Unity Cloud Edition ...
文章属性
文章编号: 000210066
文章类型: Solution
上次修改时间: 31 12月 2025
版本:  2
从其他戴尔用户那里查找问题的答案
支持服务
检查您的设备是否在支持服务涵盖的范围内。