DLMHOST - DLMHOST STC log destination issue

摘要: DLMHOST started task sample JCL from older versions specifies EOL console name parm.

本文适用于 本文不适用于 本文并非针对某种特定的产品。 本文并非包含所有产品版本。
查看其他资源

症状

The DLMHOST STC output is being directed exclusively to the z/OS system log.

原因

Older versions of the DLMHOST started task JCL in the samplib provided by Dell Technologies contained a parm value for console name.  That parm was EOL and can cause unpredictable results for the DLMHOST log output. 

解决方案

Use only the parms specified for DLMHOST in the DLm z/OS Utilities / Command Processors Guide.
 
  • COL 1-10 VTE NODENAME                
  • COL 12-15 COMMAND DEVICE (CMDDEV)    
  • COL 17-20 LOG DEVICE (LOGDEV)        
  • ** COL 22-29 CONSOLE NAME (CONSNAME)    <-- This is EOL.  Do not use this parm for DLMHOST
     
  • example:  
    VTLNODE1   07EF 07FF TAPECON1           
    VTLNODE2   08EF 08FF TAPECON2           
    VTLNODE3   01FE 01FF TAPECON3           
    VTLNODE4   06FE 06FF TAPECON4        
Parms in red text may misdirect DLm VTE log output.  Only use the parms / columns defined in the DLm z/OS Utilities / Command Processors Guide.

受影响的产品

DD for DLm8100, Disk Library for mainframe DLm2100, Disk Library for mainframe DLm2500, Disk Library for mainframe DLm8100, VNX for DLm2100, VNX for DLm8100
文章属性
文章编号: 000216398
文章类型: Solution
上次修改时间: 18 5月 2026
版本:  4
从其他戴尔用户那里查找问题的答案
支持服务
检查您的设备是否在支持服务涵盖的范围内。