Data Domain: Unable to join Active Directory | Password contains Multi-byte Characters

摘要: This article describes a known limitation where a Data Domain system fails to join an Active Directory (AD) domain if the AD join account password contains multi-byte characters. A workaround is provided. ...

本文章適用於 本文章不適用於 本文無關於任何特定產品。 本文未識別所有產品版本。
查看其他資源

症狀

When attempting to join a Data Domain system to Active Directory, the operation fails with errors similar to the following:
messages.engineering:
ddsh: NOTICE: MSG-DDSH-00009: (tty=pts/2, session=13161) sysadmin: command "cifs set authentication active-directory abc.xyz.com <IP>"..

sms: NOTICE: Could not join domain abc.xyz.com

sms: NOTICE: cifs_join: result_status [3] result_string [Failed with internal error (no output)]

原因

Joining a Data Domain to Active Directory (AD) fails if the password contains multibyte characters.
 
  • Data Domain supports ASCII and extended ASCII characters, but not multi-byte characters
  • This limitation is only for the user password used when joining AD.
  • It does not apply to user authentication while connecting to a CIFS share on a Data Domain.

解析度

  • This issue does not affect data access on the Data Domain.
  • The workaround is to use only ASCII or extended ASCII characters in the password.
 
If the problem persists after applying this article, contact your contracted support provider for further assistance.

其他資訊

Reference

受影響的產品

Data Domain
文章屬性
文章編號: 000028763
文章類型: Solution
上次修改時間: 13 5月 2026
版本:  5
向其他 Dell 使用者尋求您問題的答案
支援服務
檢查您的裝置是否在支援服務的涵蓋範圍內。