NetWorker: Creating a Data Domain device fails with error: Authentication type AUTH_NONE not adequate
摘要: Attempting to create a NetWorker Data Domain device fails, peer information must be cleared on all involved hosts for the other hosts.
本文章適用於
本文章不適用於
本文無關於任何特定產品。
本文未識別所有產品版本。
症狀
Data Domain device creation fails in NetWorker, the following error is observed:
authentication error: Rd=SN-NAME:DD-NAME_DEV-NAME Authentication type AUTH_NONE not adequate
Where SN-NAME is the name of the remote storage node.
Where DD-NAME is the name of the Data Domain.
Where DEV-NAME is the name of the device user is attempting to create.
原因
Corrupted NetWorker peer information between the NetWorker server and the Storage Node managing the device.
解析度
Clear the NetWorker peer information on both the NetWorker server and storage nodes observing this failure. One of the following methods can be used:
- NetWorker: How to clear NSR peer information mismatches automatically using nsradmin -C
- NetWorker: Fixing inconsistent NSR peer information
NOTE: If the NetWorker Management Console (NMC) server is on a separate host from the NetWorker server, the NMC server's peer information should also be cleared.
受影響的產品
NetWorker產品
NetWorker, NetWorker Series文章屬性
文章編號: 000036946
文章類型: Solution
上次修改時間: 14 1月 2026
版本: 4
向其他 Dell 使用者尋求您問題的答案
支援服務
檢查您的裝置是否在支援服務的涵蓋範圍內。