Dell Networking X Series: How to Check MAC Address Table Using WebGUI and CLI
摘要: Manage Dell Networking X Series switches via WebGUI or CLI to view MAC address tables, including dynamic, interface specific, and VLAN based addresses.
本文章適用於
本文章不適用於
本文無關於任何特定產品。
本文未識別所有產品版本。
症狀
This article explains how to check mac address table on the Dell Networking X series switches through WebGUI or CLI.
We can find the mac address of the devices connected to the switch by using following methods.
1. Check using WebGUI
2. Check Using Command Line (CLI)
Check Using WebGUI
Step 1: Click Network Administration -> Port Settings -> Address Tables

Step 2: Click "Dynamic Address Table" to check the mac address of all devices connected to this switch.

Check Using Command Line (CLI)
| Command Syntax | Description |
console# show mac address-table |
List the mac address of all devices. |
console# show mac address-table interface GigabitEthernet X/Y/Z |
List the mac address of all devices which are learning under GigabitEthernet X/Y/Z. |
console# show mac address-table vlan XX |
List the mac address of all devices which are learning under vlan XX. |
Sample Output
In the below example, the output shows the mac address learned in vlan 30.
console# show mac address-table vlan 30
Flags: I - Internal usage VLAN
Aging time is 300 sec
Vlan Mac Address Port Type
------------ --------------------- ---------- ----------
30 XX:XX:XX:XX:XX:XX gi1/0/1 dynamic
In the below example, the output shows the mac address learned on the interface gi1/0/1.
console# show mac address-table interface GigabitEthernet 1/0/1
Flags: I - Internal usage VLAN
Aging time is 300 sec
Vlan Mac Address Port Type
------------ --------------------- ---------- ----------
1 XX:XX:XX:XX:XX:XX gi1/0/1 dynamic
30 XX:XX:XX:XX:XX:XX gi1/0/1 dynamic原因
.
解析度
.
受影響的產品
Dell Networking X1000 Series, Dell Networking X4000 Series文章屬性
文章編號: 000134741
文章類型: Solution
上次修改時間: 08 4月 2025
版本: 4
向其他 Dell 使用者尋求您問題的答案
支援服務
檢查您的裝置是否在支援服務的涵蓋範圍內。