跳至主要內容
登出

歡迎來到 Dell

我的帳戶
  • 簡單快速地下訂單
  • 檢視訂單及追蹤商品運送狀態
  • 建立並存取您的產品清單
  • 使用「公司管理」來管理您的 Dell EMC 網站、產品和產品層級連絡人。
登入 建立帳戶 Premier 登入 合作夥伴計畫登入
與我們連絡

您的 Dell.com 購物車

文章編號: 000137382

Troubleshooting Headphone or Microphone Jack Issues on a Dell Latitude and OptiPlex

摘要: This article provides the information about how to resolve headphone or microphone jack issues on a Dell Latitude and OptiPlex computer.

本文可能採用自動翻譯。如果您對翻譯品質有任何寶貴意見，請使用此頁面底部的表單告訴我們，謝謝。

文章內容

症狀

NOTE: XPS laptops purchased after April 2022, have AC Adapter LEDs that turn off after the AC adapter is connected to AC power or connected to the computer. This feature was added to reduce light pollution in low light environments. When connected to the wall outlet, the LED will illuminate for 10 seconds then turn off. When the USB Type-C connecter is plugged into the computer, the Adapter LED will flash six times in twelve seconds then turn off. This is normal behaviour for XPS Laptop AC adapters for computers made after April 2022.
  • Using a headphone/microphone combo connector on Dell Latitude laptops.
  • The rear audio port on a Dell OptiPlex desktop is disabled when a headphone is connected to the front audio port.

原因

By design, when a headphone or headset is connected to the audio port on the front panel, the rear audio port is disabled. This allows for private audio using headphones, and the rear jack is enabled when the headphones are disconnected.

解析度

Using a headphone/microphone on a Latitude laptop

The two most common types of connectors for audio jacks are a 2 ring (3 conductor) connector and a 3 ring (4 conductor) or Tip, Ring, Ring Sleeve (TRRS) connector. The difference between the two can be seen in the image below.

TRSS connector
Figure 1: Example of two different types of headphone or microphone connectors.

Most Latitude laptops have a microphone/headphone combo jack. Headsets with a 3 ring TRRS connector support both audio playback and recording using the microphone on the headset. The E-series docking stations has a separate headphone and microphone port. This setup requires a headset that supports a 2 ring connector, one each for headphone and microphone.

In order to use a headset/microphone combo device on the Latitude laptops, you must disable the internal microphone in Windows sound properties.

  1. Press Windows + Q to open the search panel.
  2. Type control panel and press Enter.
  3. In Control Panel, click Hardware and Sound, and then click Sound.
  4. Select the Recording tab.

  5. Recording tab
    Figure 2: Screenshot of audio properties in Windows.

  6. Choose the Microphone Array on the IDT High Definition Audio CODEC device.
  7. Click Properties to open the Microphone Array Properties window.
  8. From the General tab, use the dropdown menu and choose Don't use this device (disable).

    Microphone Array
    Figure 3: Screenshot of microphone array properties in Windows.

  9. Click Apply.
  10. Click OK to exit the Microphone Array Properties window.
  11. Click OK to exit the Sound properties window.

If the issue persists, see the Dell knowledge base articles mentioned below.

To learn more about troubleshooting headphone or speaker issue, see the Dell knowledge base article How to Troubleshoot No Sound on Computer or Audio Playback Issues.

To troubleshoot microphone related issues, see the Dell knowledge base article How to Troubleshoot Audio or Sound Recording Issues.

其他資訊

Recommended Articles

Here are some recommended articles related to this topic that might be of interest to you.

文章屬性

受影響的產品

OptiPlex, Latitude

上次發佈日期

24 7月 2023

版本

9

文章類型

Solution

返回頁首