Data Domain: Default Authentication Mode for DD Boost Clients Does Not Provide Over-The-Wire Encryption

摘要: After upgrading DDOS, receive the error "Default authentication mode for DD Boost clients does not provide over-the-wire encryption."

本文章適用於 本文章不適用於 本文無關於任何特定產品。 本文未識別所有產品版本。
查看其他資源

症狀

Applicable versions:
DDOS 7.10.1.10, DDOS 7.7.5.20, or DDOS 7.12, or a later version

The following Security alert is observed in the autosupport file: 
Current Alerts

--------------

Id       Post Time                  Severity   Class               Object              Message

------   ------------------------   --------   -----------------   -----------------   -------------------------------------------------------------------------------------------------------------

m0-53    Wed May 10 00:06:41 2023   ALERT      Security                                EVT-DDBOOST-00001: Default authentication mode for DDBoost clients does not provide over-the-wire encryption.

------   ------------------------   --------   -----------------   -----------------   -------------------------------------------------------------------------------------------------------------

原因

If DD Boost encryption strength is set to none in the previous DDOS release, and DDOS is upgraded to 7.10.1.10, 7.7.5.20, or 7.12, or a later version, then a security alert is raised to remind the user to enable encryption.

Command to check current encryption strength:

ddboost option show global-encryption-strength

解析度

Steps using CLI:

  1. Clear the alert manually: 
    alerts clear alert-id <alert-id-list>
  2. Set the global-encryption-strength to medium or high:

    Syntax:

    ddboost option set global-authentication-mode none global-encryption-strength {medium | high}
  3. Reset global authentication mode and global encryption strength to none:
ddboost option set global-authentication-mode none global-encryption-strength none

Steps using UI:

  1. Log in to the Data Domain System Manager (UI).
  2. Go to Protocols.
  3. Go to DD Boost.
  4. Click More Tasks in the upper right corner.
  5. Select Set Option.
  6. Under Security, select encryption strength to medium or high.
  7. Click OK.
  8. Go to Health.
  9. Go to Alert.
  10. Select the alert and click Clear.

To reset Global Authentication Mode back to 'none':

  1. Go to Protocols.
  2. Go to DD Boost.
  3. Click Configure before Global Authentication Mode.
  4. Select none and click OK. This resets the global authentication mode and global encryption strength to none.
Note: Keeping the current global-encryption setting may trigger a reminder alert "Default authentication mode for DD Boost clients does not provide over-the-wire encryption," but DD Boost operation successfully continues. Setting global-encryption to medium or high may result in a drop in Boost I/O performance. If over-the-wire encryption is required, change global-encryption to medium or high.

 

Note: If using Avamar Integrated Data Protection Appliance with Session Security Settings enabled, it is safe to disregard this alert. Avamar is already encrypting the data and there is no necessity to use DD Boost encryption. Use the below command to disregard the alert from the Data Domain. 
alert clear alert-id

How to Reset Global Encryption Strength & Clear Errors in Dell Data Domain

Duration: 00:03:32 (hh:mm:ss)
When available, closed caption (subtitles) language settings can be chosen using the CC icon on this video player.

其他資訊

See related article: Data Domain - DD Boost global authentication and encryption

受影響的產品

Data Domain

產品

Data Domain Encryption, DD OS
文章屬性
文章編號: 000215316
文章類型: Solution
上次修改時間: 12 2月 2025
版本:  8
向其他 Dell 使用者尋求您問題的答案
支援服務
檢查您的裝置是否在支援服務的涵蓋範圍內。