文章編號: 000216532
Changing the Storage Controller Mode Causes Windows Blue Screen with INACCESSIBLE BOOT DEVICE Error
摘要: This article provides information about Windows blue screen issue with "INACCEESSIBLE BOOT DEVICE" error code.
文章內容
症狀
Affected Operating Systems:
- Windows
Note: If the user reimages or reinstalls the operating system, the computer cannot go through Dell SupportAssist OS recovery.
Changing the computer storage SATA/NVMe Operation settings to the opposite option (from AHCI/NVMe to RAID ON or from RAID ON to AHCI/NVMe) in the BIOS, could cause windows to present an INACCESSIBLE BOOT DEVICE error while booting the computer.
Note: This is not the only reason that a user may experience an INACCESSIBLE BOOT DEVICE error while booting, use this as a troubleshooting step.
The Blue screen error occurs when the storage mode is not the same as the mode used when the operating system is installed. If the computer is operated in a different mode than shipped, installing the operating system with the controller in that mode is required. Example: If the controller is set to the AHCI/NVMe mode (RAID ON is default), then an operating system reinstall is required.
Figure 1: (English Only) INACCESSIBLE BOOT DEVICE error
原因
Changing the storage controller mode in the BIOS requires reinstallation of the operating system to align the storage driver configuration with the controller mode.
解析度
Do one of the following to resolve:
- If Storage mode is changed, option (AHCI/NVMe to RAID ON or RAID ON to AHCI/NVMe) reinstallation of the operating system in that controller mode is required.
- Change the Storage controller settings back to the original configuration can resolve the blue screen error.
其他資訊
Related Articles:
文章屬性
上次發佈日期
03 10月 2023
版本
4
文章類型
Solution