Passer au contenu principal
  • Passer des commandes rapidement et facilement
  • Afficher les commandes et suivre l’état de votre expédition
  • Créez et accédez à une liste de vos produits

Dell Latitude E7240 Owner's Manual

Installing the Display Assembly

  1. Insert the LVDS and wireless antenna cables through the holes on the base chassis and connect them.
  2. Place the display assembly onto the computer.
  3. Tighten the screws on both sides to secure the display assembly.
  4. Tighten the screw that secures heatsink to the computer.
  5. Route and connect the LVDS cables through the routing channel.
  6. Connect the WLAN cable to the computer.
  7. Install:
    1. palmrest
    2. keyboard
    3. base cover
    4. SD card
    5. battery
  8. Follow the procedures in After Working Inside Your Computer.

Évaluez ce contenu

Précis
Utile
Facile à comprendre
Avez-vous trouvé cet article utile ?
0/3000 characters
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez indiquer si l’article a été utile ou non.
  Les commentaires ne doivent pas contenir les caractères spéciaux : <>()\