Dell OptiPlex 5060 Small Form Factor Service Manual

Installing the M.2 PCIe SSD

1. Place the SSD thermal pad into the slot on the system board [1] .
2. Insert the M.2 PCIe SSD to the connector on the system board [2].
3. Replace the single (M2x3.5) screw that secures the M.2 PCIe SSD to the system board [3].
   
4. Install the:
   1. Heatsink assembly
   2. Hard drive and optical drive module
   3. HDD assembly
   4. Front bezel
   5. Side cover
5. Follow the procedure in After working inside your computer.