Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell Latitude 7370 Owner's Manual

Removing the system board

  1. Follow the procedure in Before working inside your computer.
  2. Remove the:
    1. base cover
    2. battery
    3. SSD
    4. WLAN card
    5. WWAN card
    6. coin cell
  3. Disconnect the following cables from the system board:
    1. speaker cable
    2. touch pad cable
    3. smart card cable
    4. display cable
    5. LED cable
    6. array mic cable
    7. finger print cable
    8. WWAN AUX antenna cable
    9. NFC cable
    Figure displaying disconnecting various cables.
  4. To remove the system board:
    1. Remove the screws that secure the system board to the computer [1].
    2. Remove the screws that secure the metal tab and remove it from the computer [2, 3].
    Figure displaying the removal of screws.
  5. Lift the system board from the computer.
    Figure displaying the removal of system board.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\