Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Event and Error Message Reference Guide for 13th Generation Dell PowerEdge ServersVersion 1.2

PDF

TST Event Messages

TST100

Message
The operation was successful.
Detailed Description
The operation completed successfully.
Recommended Response Action
No response action is required.
Category
Configuration (TST = Test Alert)
Severity
Severity 3 (Informational)
No alerts are applicable for this message

TST101

Message
Resource allocation failure.
Detailed Description
The operation did not complete successfully because of lack of memory or file space in the iDRAC firmware.
Recommended Response Action
Reset the iDRAC and retry the operation.
Category
Configuration (TST = Test Alert)
Severity
Severity 1 (Critical)
No alerts are applicable for this message

TST102

Message
Email alert destination address not configured.
Detailed Description
The destination address of the email is not configured.
Recommended Response Action
Configure the email alert destination address and retry the operation.
Category
Configuration (TST = Test Alert)
Severity
Severity 2 (Warning)
No alerts are applicable for this message

TST103

Message
Missing parameters arg1
Arguments
arg1 = parameter names
Detailed Description
One or more required parameters needed for the operation are missing.
Recommended Response Action
To provide the correct parameters, see Lifecycle Controller-Remote Services documentation.
Category
Configuration (TST = Test Alert)
Severity
Severity 2 (Warning)
No alerts are applicable for this message

TST104

Message
SNMP traps not configured.
Detailed Description
The SNMP trap being tested is not properly configured.
Recommended Response Action
Configure the SNMP trap and retry the operation. If the issue persists, reset iDRAC.
Category
Configuration (TST = Test Alert)
Severity
Severity 2 (Warning)
No alerts are applicable for this message

TST105

Message
Invalid parameter value for arg1 .
Arguments
arg1 = parameter name
Detailed Description
The value provided for the specified parameter is invalid.
Recommended Response Action
To provide the correct value for the specified parameter, see Lifecycle Controller-Remote Services documentation.
Category
Configuration (TST = Test Alert)
Severity
Severity 2 (Warning)
No alerts are applicable for this message

TST106

Message
Email alert destination address not configured.
Detailed Description
The email alert being tested is not properly configured.
Recommended Response Action
Configure the email alert and retry the operation. If the failure persists, reset iDRAC.
Category
Configuration (TST = Test Alert)
Severity
Severity 2 (Warning)
No alerts are applicable for this message

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\