Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Dell Wyse ThinOS Version 8.5 Hotfix Administrator’s Guide

PDF

Configuring the Caradigm Vault server

To configure the Caradigm Vault server on ThinOS:
  1. From the desktop menu, click System Setup, and then click Remote Connections.
    The Remote Connections dialog box is displayed.
  2. Click the Authentication tab, click the Caradigm button, enter the IP address of the SSO & CM Server, and then click OK.
  3. On the Caradigm Vault Server, use the following guidelines:
    • Ensure that the Enroll unenrolled badges option is checked.

    • Make sure that all Badge ID mapping entries are deleted.

    Tap Server
  4. Click SSO&CM > Advanced Configurations , and use the following guidelines:
    Advanced configurations
    1. Ensure that the Enable Proximity Support check box is selected.
    2. Ensure that the Enable way2care check box is selected.
  5. To prepare a certificate to the Caradigm Vault Server, use the following guidelines:
    The Caradigm Vault Server uses the certificate to validate the connection between the Tap Server and the thin client.
    1. To raise a request for the certificate:
      • The certificate should be issued by your Certificate Authority.
      • Prepare the certificate in two formats:
        • PFX format which has a private key.
        • The other is PEM format which is text-based, Base64-encoded DER file. For Example, Caradigm.cer, Caradigm.pfx.
    2. To import a certificate to the thin client, use either of the following two options:
      • Click System Setup > System tools > Certificates to import certificates from USB storage or file server.
      • Use INI file to import certificate.
        AddCertificate=client_cert.pfx password=passpass
    3. To add a certificate to Vault server:
      Thin client certificates
      Use the Thin Client Certificates page to add certificates for the thin client devices. The certificate must be a text in PEM format, that is, a text-based Base64-encoded DER file.
      • Open the DER cert file on Notepad.
      • Log in to the Vault Server Admin Console, and then click Appliance > Thin Client Certificates.
      • Copy the Notepad text to the Vault server
Configuration on VDI server and desktops

Caradigm solution of ThinOS supports the multi-types of VDI server such as VMware View Horizon 6, Citrix Virtual Apps 6.5, Citrix Virtual Apps and Desktops 5.6, and Citrix Virtual Apps and Desktops 7.6.

To configure the VDI server and desktop:

  • Install the Caradigm desktop components in the servers and desktops.
  • Indicate vault server IP, and then provide a valid security token.
  • Add following lines to Service section of the \programdata\sentillion\vergence\Authenticator.ini configuration file.
    TapServerIdentification=True
RemotePromptForPassword=Badge
NOTE:At present, the following PCoIP enabled thin clients offer Caradigm SSO over PCoIP:
  • Wyse 3030 LT with PCoIP
  • Wyse 3040 with PCoIP
  • Wyse 5010 with PCoIP (D10DP)
  • Wyse 5040 AIO with PCoIP (5213)
  • Wyse 5060 with PCoIP

SSO and CM client installed on your VDI server and desktops must be upgraded to latest version 6.2.5 in order to support this feature.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\