Dell Command | Power Manager Version 2.0 User Guide

To disable a specific day, set all the hour and minute fields in that template to 0 (zero). To configure Start Time for the day:

• Set Hours: 0-23

• Set Minutes: 0, 15, 30, 45

To configure End Time for the day:

• Set Hours: 0-23

• Set Minutes: 0, 15, 30, 45

Typical uses for these settings are:

• Set the minimum and maximum threshold limits and leave the Threshold value field blank. This sets a limit for the range, but allows the threshold value to be modified in the user interface.

  OR:

• Set Threshold value and leave the Minimum threshold limit and Maximum threshold limit blank. This value will be locked and cannot be modified in the user interface.

  To set a range for the threshold limits, enter the Minimum (1 - 100) and Maximum (Minimum - 100) values. If a minimum or maximum limit is not within the client system's minimum or maximum capabilities, the client system's minimum or maximum limit will be used.

  NOTE: The system will use default values if invalid values are set.