Removing display
assembly
Steps
- Follow the procedure in Before working inside
your computer.
- Remove the:
- base cover
- battery
- WLAN card
- WWAN card (optional)
- hard drive assembly(optional)
- display hinge cover
- To disconnect the display cable:
- Release the WLAN and WWAN cables from the routing
channels [1].
- Remove the M2*5 screw that secures the display
cable bracket to the computer [2].
- Remove the display cable bracket that secures
the display cable [3].
- Disconnect the display cable from the connector on the system board [4].
- Remove the screw to release the display cable from the computer [5].
- To release the display assembly:
- Remove the M2*5 screws that secure the display
assembly to the computer [1].
- Release the WLAN cable, WWAN cable and display cable
through the routing channels [2] [3].
- Turn over the computer.
- To
remove the display assembly:
- Remove the screws that secure the display
assembly to the computer [1].
- Open the display [2].
- Lift the display assembly from the computer.
Data is not available for the Topic