Dell PowerEdge RAID Controller 11 User’s Guide PERC H755, H750, H355, and H350 Controller Series

View battery properties

1. Enter the Dell PERC 11 Configuration Utility. See Navigate to Dell PERC 11 configuration utility.
2. Click Main Menu > Hardware Components > Battery Management.
   The battery and capacity information are displayed.
3. You can view the following properties of the battery:

   Table 1. Battery propertiesThis table displays the properties of battery.

   Field	Description
   Type	Displays the type of battery available.
   Status	Displays the current status of the battery.
   Temperature	Displays the current temperature of the battery and also indicates whether the temperature is normal or high.
   Charge	Displays the available charge of the battery in percentage.

4. Displays click Advanced....
   The additional advanced properties of the physical battery are displayed.
5. You can view the following advanced properties of the battery:

   Table 2. Advanced battery propertiesThis table displays the advanced battery properties.

   Field	Description
   Status	Displays whether the current status of the battery is learning, degraded, or failed.
   Voltage	Displays whether the voltage status of the battery is normal or high.
   Current	Displays power consumption of the battery in milliamps (mA).
   Full capacity	Displays the maximum charge capacity of the battery.
   Remaining capacity	Displays the current charge capacity of the battery.
   Expected margin of error	Displays expected margin of error.
   Completed discharge cycles	Displays the completed discharge cycles.
   Learn mode	Displays the condition of the battery. The learn cycle is a periodic operation that calculates the charge that is remaining in the battery to ensure there is sufficient energy.