Skip to main content
Welcome
Dell Sites
Dell Technologies
Premier Sign In
Partner Program Sign In
Support
Dell Sites
Dell Technologies
Premier Sign In
Partner Program Sign In
Support
Sign Out
Welcome to Dell
My Account
Place orders quickly and easily
View orders and track your shipping status
Create and access a list of your products
Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In
Create an Account
Premier Sign In
Partner Program Sign In
Contact Us
HK/EN
Cart
Your Dell.com Carts
Products
Solutions
Services
Support
Back
Support
Support Home
Support Library
Support Videos
Support Services & Warranty
Drivers & Downloads
Manuals & Documentation
Diagnostics & Tools
Self-Repair & Parts
Service Requests & Dispatch Status
Order Support
Contact Technical Support
Community
Contact Us
HK/EN
Back
home
Support
Product Support
Manuals
Dell FluidFS Version 5.0 FS8600 Appliance Pre-Deployment Requirements
Hide Table of Contents
About This Guide
Revision History
Notes, Cautions, and Warnings
Deployment Prerequisites
Rack and Infrastructure
Materials
Network Credentials
SAN and Internal Network for Fibre Channel Appliances
SAN and Internal Networks for iSCSI Appliances
Client Network
IP Addresses and Network Infrastructure
Network Ports
SAN Configuration
Hide Table of Contents
Show Table of Contents
Show Table of Contents
Print
PDF
English
Deutsch
English
Español
Français
日本語
简体中文
Loading, Please wait
Rack and Infrastructure
Make sure the rack space and related infrastructure are available for the FS8600 appliances.
■
Prerequisite
□
2U rack space for each FS8600 appliance in an industry-standard 48.3 cm (19 inch) rack
The rack must be four-post, square-hole or round-hole, and tool-less.
The rack must be rated for 540 kg (1200 pounds) static load or greater.
The rack depth must be at least 100 cm (40 inches) from the front to the back of the rack.
The distance between the inside of the front and back rack posts (the mounting surfaces) must be 61 cm (24 inches) to 90 cm (36 inches).
The rack door and the front of the hardware must have at least 4.1 cm (1.6 inches) between them to accommodate the front bezel.
The rack (with installed hardware) must meet the safety requirements of UL 60950-1 and IEC 60950-1.
□
Rack has two power sources for each FS8600 appliance, preferably from different circuits
The voltage range must be 90 to 264 VAC.
Each power source must have sufficient electrical overload protection.
In North America, connect the appliance to a source of power with overcurrent protection provided by a 20 A or less device (UL 489 circuit breakers).
In Europe, the overcurrent protection must be provided by a 20 A or less device (IEC circuit breakers).
□
Rack has connectivity to the SAN and client networks
Data is not available for the Topic
Rate this content
All fields are required unless marked otherwise.
Accurate
not accurate
somewhat accurate
mostly accurate
accurate
very accurate
Useful
not useful
somewhat useful
mostly useful
useful
very useful
Easy to understand
not easy
somewhat easy
mostly easy
easy
very-easy
Was this article helpful?
Yes
No
Send us feedback
(Optional)
0
/3000 characters
Comments cannot contain these special characters: <>()\
Send Feedback
Sorry, our feedback system is currently down. Please try again later.
Thank you for your feedback.
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\