Configuring the Microsoft Remote Desktop broker connection
To configure the Microsoft Remote Desktop broker setup:
- From the desktop menu, click
System Setup, and then click
Remote Connections.
The Remote Connections dialog box is displayed.
- In the
Broker Setup tab, from the drop-down list, select
Microsoft, and do the following:
- Broker Server—Enter the IP address/Hostname/FQDN of the Broker Server.
- Auto Connect List—Enter the name of the desktops that you want to launch automatically after logging in to the respective broker. More than one desktop can be entered. Each desktop name is separated by semi-colon, and is case-sensitive.
- Security mode—Select the preferred security mode from the following options:
- Warning—Warn Security requires an FQDN address with a self-signed certificate, or without any certificate. However, a corresponding warning message is displayed for the user to continue.
- Full—Full Security requires an FQDN address with a domain certificate.
- Low—Security allows an FQDN or an IP address with or without a certificate.
- Default—Follows global security mode settings.
NOTE: If you select the Security mode as Warning, a security pop-up window is displayed when the certificate is invalid. If you select the Security mode as Low, you can continue without the warning message.
- Click OK to save the settings.