Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Dell Latitude E5270 Owner's Manual

PDF

Removing the battery

  • NOTE: Discharge the battery as much as possible before removing from the system. This can be done by disconnecting the A/C adapter from the system (while the system is turned on) to allow the system to drain the battery.
  1. Follow the procedure in Before working inside your computer .
  2. Remove the base cover.
  3. To remove the battery:
    1. Disconnect the battery cable from the connector on the system board [1].
    2. Remove the screws that secure the battery to the computer [2].
      • NOTE: The number of screws will vary depending on the type of battery installed.
    3. Lift the battery away from the computer [3].
      • Do not apply pressure to the surface of the battery
      • Do not bend
      • Do not use tools of any kind to pry on or against the battery
      • If a battery cannot be removed within the constraints above, please contact Dell technical support
      Figure displaying how to remove Figure displaying how to remove the battery from computer.
  4. Unroute the cable from the routing channel [1] and remove the cable from the battery [2].
    • NOTE: This step is applicable only for a 4-cell battery.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\